DatasheetsPDF.com

VNH7100AS-E

Part Number	VNH7100AS-E
Manufacturer	STMicroelectronics
Description	Automotive fully integrated H-bridge motor driver
Published	Apr 13, 2016
Detailed Description	VNH7100AS-E Automotive fully integrated H-bridge motor driver Features SO-16N GAPGCFT00648 Type VNH7100AS-E RDS(on)...
Datasheet	VNH7100AS-E PDF File

Overview

VNH7100AS-E Automotive fully integrated H-bridge motor driver Features SO-16N GAPGCFT00648 Type VNH7100AS-E RDS(on) 100 mΩ typ (per leg) Iout VCCmax 12 A 41 V • Automotive qualified • Output current: 15 A • 3 V CMOS-compatible inputs • Undervoltage shutdown • Overvoltage clamp • Thermal shutdown • Cross-conduction protection • Current and power limitation • Very low standby power consumption • Protection against loss of ground and loss of VCC • PWM operation up to 20 KHz • Multisense diagnostic functions – Analog motor current feedback – Output short to ground detection – Thermal shutdown indication – OFF-state open-load detection – Output short to VCC detection • Output protected against short to ground and short to VCC • Standby Mode • Half Bridge Operation • Package: ECOPACK® Datasheet - preliminary data Description The VNH7100AS-E is a full bridge motor driver intended for a wide range of automotive applications.
The device incorporates a dual monolithic high-side driver and two low-side switches.
Both switches are designed using STMicroelectronics’ well known and proven proprietary VIPower® M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuitry.
The three dies are assembled in SO-16N package on electrically isolated leadframes.
Moreover, its fully symmetrical mechanical design allows superior manufacturability at board level.
The input signals INA and INB can directly interface to the microcontroller to select the motor direction and the brake condition.
A SEL0 pin is available to address to the microcontroller the information available on the Multisense.
The Multisense pin allows to monitor the motor current by delivering a current proportional to the motor current value.
The normal operating condition is explained in the truth table.
The PWM, up to 20 KHz, allows to control the speed of the motor in all possible conditions.
In all cases, a low level state on the PWM pin t...

Similar Datasheet

VNH7100AS Automotive fully integrated H-bridge motor driver - STMicroelectronics
VNH7100AS-E Automotive fully integrated H-bridge motor driver - STMicroelectronics

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)