| Hit | Part # | Manufacturer | Description |
|---|---|---|---|
| 20 Hits | NAS1097 |
ETC |
National Aerospace Standards Committee |
| 13 Hits | CS8955 |
ETC |
The RDS decoding scheme |
| 11 Hits | TDA7330B |
ST Microelectronics |
SINGLE CHIP RDS DEMODULATOR FILTER ifferential decoding circuit, ARI indication and RDS signal quality output. November 1999 1/9 TDA7330B ABSOLUTE MAXIMUM RATINGS Symbol VCC Top Tstg Supply Voltage Operating Temperature Range Storage Temperature Parameter Value 7 -40 to 85 -40 to 1 |
| 11 Hits | CY621472G30 |
Cypress Semiconductor |
4-Mbit (256K words x 16 bit) Static RAM ■ High speed: 45 ns/55 ns ■ Ultra-low standby power ❐ Typical standby current: 3.5 A ❐ Maximum standby current: 8.7 A ■ Embedded ECC for single-bit error correction[1, 2] ■ Wide voltage range: 1.65 V to 2.2 V, 2.2 V to 3.6 V, and 4.5 V to 5.5 V ■ 1 |
| 9 Hits | BU1922 |
Rohm |
RDS/RBDS decoder |
| 8 Hits | RF3808S |
International Rectifier |
Power MOSFET(Vdss=75V/ Rds(on)=0.007ohm/ Id=106A) of this HEXFET power MOSFET are a 175°C junction operating temperature, low RθJC, fast switching speed and improved repetitive avalanche rating. This combination makes the design an extremely efficient and reliable choice for use in higher power Auto |
| 8 Hits | IC11S-BD-PEJR |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 8 Hits | IC11S-BUR-EJL |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 8 Hits | IC11SA-BD-EJL |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 8 Hits | IC11SA-BUR-EJR |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 8 Hits | MVH-155UI |
Pioneer |
RDS MEDIA CENTER RECEIVER SERVICE MANUAL and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. Where in a manufacturer’s service documentatio |
| 8 Hits | DEH-2600UI |
Pioneer |
CD RDS RECEIVER Owner Manual |
| 7 Hits | IC11S-68PL-1.27SF-EJR |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 7 Hits | IC11S-BUR-PEJL |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 7 Hits | IC11SA-68PL-1.27SF-EJL |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 7 Hits | IC11SA-BUR-FEJR |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 7 Hits | IC11SA-BUR-PNEJL |
Hirose |
Single Slot SMT Connectors For Card-Bus Based PC Cards 1. PC Card Standard compliant: • Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. • Type 1, type 2 and type 3 cards are covered |
| 7 Hits | SLE4428 |
Infineon Technologies |
ICs for Chip Cards / Intelligent 8-Kbit EEPROM q q q q q q q q q 1024 x 8 bit EEPROM organization Byte-wise addressing Irreversible byte-wise write protection 1024 x 1 bit protection memory organization Serial three-wire bus End of programming indicated on data output Minimum of 104 write/erase |
| 7 Hits | IS42VS16100C1 |
Integrated Silicon Solution |
512K Words x 16 Bits x 2 Banks (16-MBIT) SYNCHRONOUS DYNAMIC RAM • Clock frequency: 100 MHz • Fully synchronous; all signals referenced to a positive clock edge • Two banks can be operated simultaneously and independently • Dual internal bank controlled by A11 (bank select) • Single 1.8V power supply • LVTTL inter |
| 7 Hits | DEH-X3600UI |
Pioneer |
CD RDS RECEIVER Owner Manual |