SRF04

SRF005 : SRF005 ULTRASONIC RANGE SENSOR Specification: The SRF005 ultrasonic range sensor detects objects in it’s path and can be used to calculate the range to the object. It is sensitive enough to detect a 3cm diameter broom handle at a distance of over 3m. Voltage Current Frequency Max Range Min Range Sensitivity Input Trigger Echo Pulse Small Size - 5V - 30mA Typ. 50mA Max. - 40KHz -3m - 3 cm - Detect 3cm diameter broom handle at 3 m - 10uS Min. TTL level pulse - Positive TTL level signal, width proportional to range. - 43mm x 20mm x 17mm height The module can be used in two different modes: Single Pin - Single microcontroller pin (08M, and all M2 and X2 parts) Dual Pin - Separate PICAXE mi.

SRF01 : SRF01 Ultrasonic range finder Technical Documentation Overview The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB. Connection is to a single pin Serial interface. The serial interface is a standard TTL level UART format of 1 start, 1 stop and no parity bits, and may be connected directly to many controllers, such as the Basic Stamps or the PICAXE. Baud rate at power-up is always 9600, there is a command to change this to 19200 or 38400 baud if preferred. Up to 16 SRF01's may be connected together on a single bus. Like all our rangefinders, the SRF01 can measure in Cm or Inches. Power Requirements The SRF01 accepts any voltage between 3.3v and 12v, however .

SRF02 : SRF02 Ultrasonic range finder Technical Specification www.DataSheet4U.com Overview The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. The serial interface is a standard TTL level UART format at 9600 baud,1 start, 2 stop and no parity bits, and may be connected directly to the serial ports on any microcontroller. Up to 16 SRF02's may be connected together on a single bus, either I2C or Serial. New commands in the SRF02 include the ability to send an ultrasonic burst on its own without a reception cycle, and the ability to perform a reception cycle without the preceding burst. This has been as requested feature on o.

SRF02 : SRF02 Ultra sonic range finder  http://www.robot­electronics.co.uk/htm/srf02techI2C.htm  SRF02 Ultr asonic r ange finder   Technical Specification  I2C Mode  For Serial mode click here  I2C Communication  To use the SRF02 in I2C mode, make sure nothing is connected to the mode pin, it must be left  unconnected.  The I2C bus is available on popular controllers such as the OOPic, Stamp BS2p, PicAxe etc. as well as a  wide variety of micro­controllers. To the programmer the SRF02 behaves in the same way as the  ubiquitous 24xx series EEPROM's, except that the I2C address is different. The default shipped address of  the SRF02 is 0xE0. It can be changed by the user to any of 16 addresses E0, .

SRF04 : w w w .D at aS he et 4U .c om www.DataSheet4U.com .

SRF04 : SRF04 - Ultra-Sonic Ranger Technical Specification This project started after I looked at the Polaroid Ultrasonic Ranging module. It has a number of disadvantages for use in small robots etc. 1. 2. 3. 4. 5. 6. The maximum range of 10.7 metre is far more than is normally required, and as a result The current consumption, at 2.5 Amps during the sonic burst is truly horrendous. The 150mA quiescent current is also far too high. The minimum range of 26cm is useless. 1-2cm is more like it. The module is quite large to fit into small systems, and It’s EXPENSIVE. The SRF04 was designed to be just as easy to use as the Polaroid sonar, requiring a short trigger pulse and providing an echo pulse. You.

SRF05 : SRF05 Technical Documentation Page 1 of 4 SRF05 - Ultra-Sonic Ranger Technical Specification www.DataSheet4U.com Introduction The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce costs still further. As such, the SRF05 is fully compatible with the SRF04. Range is increased from 3 meters to 4 meters. A new operating mode (tying the mode pin to ground) allows the SRF05 to use a single pin for both trigger and echo, thereby saving valuable pins on your controller. When the mode pin is left unconnected, the SRF05 operates with separate trigger and echo pins, like the SRF04. The SRF05 includes a small delay before the ec.

SRF05-HY : SRF05-HY - Ultra-Sonic Ranger Technical Specification Introduction The SRF05-HY is an evolutionary step from the SRF04-HY, and has been designed to increase flexibility, increase range, and to reduce costs still further. As such, the SRF05-HY is fully compatible with the SRF04-HY. Range is increased from 3 meters to 4 meters. A new operating mode (tying the mode pin to ground) allows the SRF05HY to use a single pin for both trigger and echo, thereby saving valuable pins on your controller. When the mode pin is left unconnected, the SRF05-HY operates with separate trigger and echo pins, like the SRF04. The SRF05-HY includes a small delay before the echo pulse to give slower controllers such a.

SRF0703 : Features Applications n Multiple applications: parallel, series, n SEPIC topology dual-inductor and transformer n Power supplies for: n Magnetically shielded, low radiation - Communication equipment 471 n Inductance range: 0.33 to 4000 μH n Rated current up to 6.19 A - Notebooks, desktop computers, servers - LCDs, flat panels, backlights n RoHS compliant* - Camcorders, HDTVs SRF0703 Series - Dual-Winding Shielded Power Inductors Electrical Specifications @ 25 °C Bourns Part No. SRF0703-R33M SRF0703-1R0M SRF0703-1R5M SRF0703-2R2M SRF0703-3R3M SRF0703-4R7M SRF0703-6R8M SRF0703-8R2M SRF0703-100M SRF0703-150M SRF0703-220M SRF.

SRF08 : Devantech SRF08 UltraSonic Ranger This Devantech high performance ultrasonic range finder is compact and measures an amazingly wide range from 3cm to 6m. The SRF08 interfaces to your microcontroller via the industry standard IIC bus. This ranger is perfect for your robot, or any other projects requiring accurate ranging information. There is even a built-in light sensor on the front of the module. You can also get a nifty Lynxmotion SRF08 Housing for one ranger or for two rangers. Specifications Beam Pattern Voltage Current Frequency Maximum Range Minimum Range Max Analogue Gain Connection Light Sensor Timing Echo Units Weight Size see graph 5v 15mA Typ. 3mA Standby 40KHz 6m 3 cm Variabl.

SRF08 : roboter-teile.de Ultraschall-Modul SRF08 Das Ultraschallmodul SRF08 eignet sich besonders gut für den Einsatz in der Robotertechnik und ist die Weiterentwicklung des erfolgreichen Ultraschallmoduls SRF04. Die Kommunikation mit dem SRF08 Ultraschallsensor erfolgt ausschließlich über den I²CBus. Dieser Bus ist verfügbar auf verschiedenen Plattformen wie PICAXE, Basic-Stamp BS2p, C-Control2 und OOPic, sowie auf einem breiten Spektrum von MC's. Am I²C-Bus verhält sich das Modul ähnlich wie die bekannten 24xx EEPROM's, nur mit anderer Adresse. Die Standardadresse (Lieferzustand) des SRF08 ist 0xE0. Vom Benutzer kann die Adresse auf eine der folgenden 16 Adressen eingestellt werden: E0, E2, E4, E6.

SRF08 : 12/04/13 SRF08 Ultra sonic range finder SRF08 Ultra sonic range finder Technical Specification Communication with the SRF08 ultrasonic rangefinder is via the I2C bus. This is available on popular controllers such as the OOPic and Stamp BS2p, as well as a wide variety of micro-controllers. To the programmer the SRF08 behaves in the same way as the ubiquitous 24xx series eeprom's, except that the I2C address is different. The default shipped address of the SRF08 is 0xE0. It can be changed by the user to any of 16 addresses E0, E2, E4, E6, E8, EA, EC, EE, F0, F2, F4, F6, F8, FA, FC or FE, therefore up to 16 sonar's can be used. In addition to the above addresses, all sonar's on the I2C bus wi.

SRF0905 : 100Y Features n Current rating up to 1.6 A n Inductance range: 10 to 6500 μH n Frequency range to 300 MHz n RoHS compliant* Applications n EMI suppression SRF0905 Series - Line Filter Electrical Specifications @ 25 °C Part Number SRF0905-100Y L (μH) ** 10 ± 30 % DCR (Ω) max. (each winding) 0.08 Rated Voltage (Vdc) 80 Impedance (Z) Rated Freq. Current Range (A) (MHz) 1.6 10020Y- 300 Min. Value (Ω) (6.22.03006 0±± 0.0.3102) SRF0905-250Y 25 ± 30 % 0.16 80 1.0 20 - 150 600 SRF0905-400Y 40 ± 30 % 0.25 80 0.9 20 - 100 800 SRF0905-500Y 50 ± 30 % 0.32 80 SRF0905-251Y 250 ± 50 % 0.13 80 0.8 9.20 ±200.3-0 100 1.2 (.362 ± .301-2)20 1500 600 SRF0905-471Y 470 ± 50 % .

SRF0905-100Y : 100Y Features n Current rating up to 1.6 A n Inductance range: 10 to 6500 μH n Frequency range to 300 MHz n RoHS compliant* Applications n EMI suppression SRF0905 Series - Line Filter Electrical Specifications @ 25 °C Part Number SRF0905-100Y L (μH) ** 10 ± 30 % DCR (Ω) max. (each winding) 0.08 Rated Voltage (Vdc) 80 Impedance (Z) Rated Freq. Current Range (A) (MHz) 1.6 10020Y- 300 Min. Value (Ω) (6.22.03006 0±± 0.0.3102) SRF0905-250Y 25 ± 30 % 0.16 80 1.0 20 - 150 600 SRF0905-400Y 40 ± 30 % 0.25 80 0.9 20 - 100 800 SRF0905-500Y 50 ± 30 % 0.32 80 SRF0905-251Y 250 ± 50 % 0.13 80 0.8 9.20 ±200.3-0 100 1.2 (.362 ± .301-2)20 1500 600 SRF0905-471Y 470 ± 50 % .

SRF0905-102Y : 100Y Features n Current rating up to 1.6 A n Inductance range: 10 to 6500 μH n Frequency range to 300 MHz n RoHS compliant* Applications n EMI suppression SRF0905 Series - Line Filter Electrical Specifications @ 25 °C Part Number SRF0905-100Y L (μH) ** 10 ± 30 % DCR (Ω) max. (each winding) 0.08 Rated Voltage (Vdc) 80 Impedance (Z) Rated Freq. Current Range (A) (MHz) 1.6 10020Y- 300 Min. Value (Ω) (6.22.03006 0±± 0.0.3102) SRF0905-250Y 25 ± 30 % 0.16 80 1.0 20 - 150 600 SRF0905-400Y 40 ± 30 % 0.25 80 0.9 20 - 100 800 SRF0905-500Y 50 ± 30 % 0.32 80 SRF0905-251Y 250 ± 50 % 0.13 80 0.8 9.20 ±200.3-0 100 1.2 (.362 ± .301-2)20 1500 600 SRF0905-471Y 470 ± 50 % .

SRF0905-202Y : 100Y Features n Current rating up to 1.6 A n Inductance range: 10 to 6500 μH n Frequency range to 300 MHz n RoHS compliant* Applications n EMI suppression SRF0905 Series - Line Filter Electrical Specifications @ 25 °C Part Number SRF0905-100Y L (μH) ** 10 ± 30 % DCR (Ω) max. (each winding) 0.08 Rated Voltage (Vdc) 80 Impedance (Z) Rated Freq. Current Range (A) (MHz) 1.6 10020Y- 300 Min. Value (Ω) (6.22.03006 0±± 0.0.3102) SRF0905-250Y 25 ± 30 % 0.16 80 1.0 20 - 150 600 SRF0905-400Y 40 ± 30 % 0.25 80 0.9 20 - 100 800 SRF0905-500Y 50 ± 30 % 0.32 80 SRF0905-251Y 250 ± 50 % 0.13 80 0.8 9.20 ±200.3-0 100 1.2 (.362 ± .301-2)20 1500 600 SRF0905-471Y 470 ± 50 % .