DatasheetsPDF.com

SRF01

Part Number	SRF01
Manufacturer	ETC
Description	Ultrasonic range finder
Published	Sep 26, 2014
Detailed Description	SRF01 Ultrasonic range finder Technical Documentation Overview The SRF01 is a single transducer ultrasonic rangefinder ...
Datasheet	SRF01 PDF File

Overview

SRF01 Ultrasonic range finder Technical Documentation Overview The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB.
Connection is to a single pin Serial interface.
The serial interface is a standard TTL level UART format of 1 start, 1 stop and no parity bits, and may be connected directly to many controllers, such as the Basic Stamps or the PICAXE.
Baud rate at power-up is always 9600, there is a command to change this to 19200 or 38400 baud if preferred.
Up to 16 SRF01's may be connected together on a single bus.
Like all our rangefinders, the SRF01 can measure in Cm or Inches.
Power Requirements The SRF01 accepts any voltage between 3.
3v and 12v, however the recommended maximum is 5.
5v.
Internally, it operates at 3.
3v and there is a low dropout regulator already on the SRF01 to provide this.
The serial I/O pin operates at 3.
3v and also 5v tolerant, so you can connect it directly to 3.
3v or 5v signals.
Operating current during ranging is 25mA, 11mA i...

Similar Datasheet

SRF-1016 Silicon Germanium IF Receiver - Sirenza Microdevices
SRF-1016Z Silicon Germanium IF Receiver - Sirenza Microdevices
SRF-2016 Silicon Germanium IF Receiver - Sirenza Microdevices
SRF-2016Z Silicon Germanium IF Receiver - Sirenza Microdevices
SRF005 ULTRASONIC RANGE SENSOR - Revolution Education
SRF01 Ultrasonic range finder - ETC
SRF02 Ultrasonic Range Finder - ETC
SRF02 Ultrasonic Range Finder Tech - ETC
SRF04 Ultrasonic Rangefinger Schematic - ETC
SRF04 Ultrasonic Range Finger Application Note - Parallax

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)