NCV7702B
1 A Dual H-Bridge Driver
This dual full-bridge driver IC is intended for 14 V automotive stepper and DC motor applications.
Its four half-bridge outputs are configured as two channels and are programmed by six TTL compatible inputs, allowing flexible control of bridge operation.
The device operates in standby mode, run mode, or brake mode and typically consumes less than 1 mA while in standby.
In run mode, each half-bridge output can deliver load current in either direction.
Brake mode activates the low side
transistors or high side
transistors at the selected outputs.
On-chip recirculation diodes are provided, and the IC has multiple fault protection modes.
Overcurrent detection p...