Part Number
|
MD-179 |
Manufacturer
|
Tyco Electronics |
Description
|
Termination Insensitive Mixer |
Published
|
Jul 27, 2007 |
Detailed Description
|
www.DataSheet4U.com
Termination Insensitive Mixer, 1 - 4000 MHz
Features
n Intermodulation Ratio is Insensitive to Port...
|
Datasheet
|
MD-179
|
Overview
www.
DataSheet4U.
com
Termination Insensitive Mixer, 1 - 4000 MHz
Features
n Intermodulation Ratio is Insensitive to Port Mismatches n VSWR: 2.
0:1 Typical Midband n Isolation: 35 dB Typical Midband n Impedance: 50 Ohms Nominal n Maximum Input Power: 350 mW Max @ 25°C, Derated n n
V 3.
00
MD-/MDC-179
FP-2 (MD-179)
to 85°C @ 3.
2 mW/°C LO Power: +24 dBm Max.
MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle.
This allows for higher power level performance with minimum distortion.
In addition the TIM has internal loads that provide a good match an...
Similar Datasheet