Part Number
|
GP2010 |
Manufacturer
|
Mitel Networks Corporation |
Description
|
GPS Receiver RF Front End |
Published
|
Mar 23, 2005 |
Detailed Description
|
GP2010
GPS Receiver RF Front End
Supersedes edition in August 1996 Global Positioning Products Handbook, HB4305-1.0 DS40...
|
Datasheet
|
GP2010
|
Overview
GP2010
GPS Receiver RF Front End
Supersedes edition in August 1996 Global Positioning Products Handbook, HB4305-1.
0 DS4056 - 3.
4 October 1996
The GP2010 is Mitel Semiconductor second generation RF Front-end for Global Positioning System (GPS) receivers.
The GP2010 uses many innovative design techniques and a leading-edge bipolar process to offer a low power, low cost and high reliability RF Front End solution .
The GP2010 is designed to operate from either 3 or 5 Volt power supplies.
The input to the device is the L1 (1575.
42MHz) CoarseAcquisition (C/A) code Global Positioning signal from an antenna (via a low-noise pre-amplifier).
The output is 2-bit quantised for subsequent signal process...
Similar Datasheet