DatasheetsPDF.com

AZ8462

Zettler
Part Number AZ8462
Manufacturer Zettler
Description MICROMINIATURE POLARIZED RELAY
Published May 12, 2016
Detailed Description AZ8462 MICROMINIATURE POLARIZED RELAY FEATURES • SMT and DIP mounting available • Microminiature size: up to 50% less ...
Datasheet PDF File AZ8462 PDF File

AZ8462
AZ8462

Overview
AZ8462 MICROMINIATURE POLARIZED RELAY FEATURES • SMT and DIP mounting available • Microminiature size: up to 50% less board area than previous generation telecom relays • High dielectric and surge voltage: 2.
5 kV surge (per Bellcore TA-NWT-001089) 1.
5 kV surge (per FCC Part 68) 1,000 Vrms, open contacts 2,000 Vrms, coil to contacts • Monostable and bistable (latching) versions available • Minimum switching load 10 mV, 10 µA • Low power consumption: 79 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed • UL, CUR file E43203 CONTACTS Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Ratings Resistive load: Max.
switched power: 60 W or 62.
5 VA Max.
switched current: 2 A Max.
switched voltage: 220 VDC* or 250 VAC Rated Load UL * Note: If switching voltage is greater than 30 VDC, special precautions must be taken.
Please contact the factory.
3 A at 30 VDC, resistive, 85°C, 100k cycles 2 A at 30 VDC resistive, 105°C, 100k cycles * 0.
3 A at 110 VDC, resistive, 85°C, 100k cycles 0.
5 A at 125 VAC, general use, 85°C Material Resistance COIL Power * not approved for 48 VDC coil or latching versions.
Silver nickel gold plated < 50 milliohms initially At Pickup Voltage (typical) Monostable: 79 mW (1.
5 - 24 VDC coil) Monostable: 152 mW (48 VDC coil) Bistable latching (single coil): 57 mW Bistable latching (dual coil): 114 mW Max.
Continuous Dissipation 0.
39 W at 20°C (68°F) ambient GENERAL DATA Life Expectancy Mechanical Minimum operations 1 x 108 Electrical 5 x 105 at 1 A 30 VDC, resistive 1 x 105 at 2 A 30 VDC, resistive 1 x 105 at 0.
5 A 120 VAC, resistive Operate Time (max.
) 4 ms at nominal coil voltage Release Time (max.
) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.
) 1500 Vrms between contact sets 1000 Vrms between open contacts Surge Voltage Coil to contacts Open contacts 2500 V (at 2/10 µs) 1500 V (at 10/160 µs) Insulation R...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)