DatasheetsPDF.com

AT9915 Datasheet PDF

Global Mixed-mode Technology
Part Number AT9915
Manufacturer Global Mixed-mode Technology
Title 1.5A Low Dropout Regulator
Description The AT9915 is a high performance positive voltage regulator designed for use in applications requiring very low dropout voltage at up to 1.5 Amps....
Features „ 1.2V,1.8V, 2.5V and 3.3V Options „ Over Current and Over Temperature Protection „ 400mV Dropout @1.5A „ MLCC Capacitance Stable „ TO-252 and TO-263T Package Applications „ Battery Powered Systems „ Motherboards „ Peripheral Cards „ Set Top Boxes „ Notebook Computers General Description The AT9915...

File Size 57.91KB
Datasheet PDF File AT9915 PDF File


AT9915 AT9915 AT9915




Similar Ai Datasheet

AT9910 : The AT9910 is a high performance positive voltage regulator designed for use in applications requiring very low dropout voltage at up to 1 Amps. The AT9910 provides excellent regulation over variations in line, load and temperature. AT9910 is stable with minimum 4.7µF MLCC (X5R) output capacitor. The AT9910 is available with 1.8V, 2.5V and 3.3V internally preset outputs. Ordering Information ORDER NUMBER AT9910-18T25U AT9910-25T25U AT9910-33T25U Note: T2 SOT-89 5: Bonding Code U : Tape & Reel MARKING A910B A910C A910D VOLTAGE 1.8V 2.5V 3.3V TEMP. RANGE -40°C ~ +85°C -40°C ~ +85°C -40°C ~ +85°C PACKAGE (Green) SOT-89 SOT-89 SOT-89 Pin Configuration Typical Application Circuit AT9910 .

AT9911 : The AT9911 is a high performance positive voltage regulator designed for use in applications requiring very low dropout voltage at up to 1 Amps. The AT9911 provides excellent regulation over variations in line, load and temperature. AT9911 is stable with minimum 4.7µF MLCC (X5R) output capacitor. The AT9911 is available with 2.5V internally preset outputs. Ordering Information ORDER NUMBER AT9911-25T45U Note: T4: TO-252 5: Bonding Code U : Tape & Reel MARKING A9911-25 VOLTAGE 2.5V TEMP. RANGE -40°C ~ +85°C PACKAGE (Green) TO-252 Pin Configuration Typical Application Circuit AT9911 Top View 1 23 VIN GND VO TO-252 VIN VO C1 4.7µF C2 10µF AT9911 VIN GND VO Ver: 0.2 Apr 19, 2012 TE.

AT9917 : The AT9917 is an advanced fixed frequency PWM IC designed to control single-switch, boost, SEPIC, and buck LED drivers in a constant current mode. The controller uses a peak current-mode control scheme (with programmable slope compensation) and includes an internal transconductance amplifier to control the output current with high accuracy. The IC includes a +/-1A gate driver that makes the AT9917 suitable for high power applications. An internal 40V linear regulator powers the IC eliminating the need for a separate power supply for the IC. The IC provides a FAULT output, which can be used to disconnect the LEDs in case of a fault condition (such as an alternator load dump in automobiles) usi.

AT9917 : The AT9917 is an advanced fixed frequency PWM IC designed to control single-switch, Boost, Sepic and Buck LED drivers in a Constant Current mode. The controller uses a Peak Current-mode control scheme with programmable slope compensation and includes an internal transconductance amplifier to control the output current with high accuracy. The IC includes a +/–1A gate driver that makes the AT9917 suitable for high-power applications. An internal 40V linear regulator powers the IC, eliminating the need for a separate power supply for the device. The IC provides a Fault output, which can be used to disconnect the LEDs in case of a Fault condition (such as an alternator load dump in automobiles) .

AT9919 : AT9919 is a PWM controller IC designed to drive high-brightness LEDs using a buck topology. It operates from an input voltage of 4.5 VDC to 40 VDC and employs hysteretic control with a high-side current sense resistor to set the constant output current. The operating frequency range can be set by selecting the proper inductor. Operation at high switching frequency is possible since the hysteretic control maintains accuracy even at high frequencies. This permits the use of small inductors and capacitors, minimizing space and cost in the overall system. LED brightness control is achieved with PWM dimming from an analog or PWM input signal. Unique PWM circuitry allows true constant color with a.

AT9919 : The AT9919 is a PWM controller IC designed to drive high brightness LEDs using a buck topology. It operates from an input voltage of 4.5 to 40VDC and employs hysteretic control with a high-side current sense resistor to set the constant output current. The operating frequency range can be set by selecting the proper inductor. Operation at high switching frequency is possible since the hysteretic control maintains accuracy even at high frequencies. This permits the use of small inductors and capacitors minimizing space and cost in the overall system. LED brightness control is achieved with PWM dimming from an analog or PWM input signal. Unique PWM circuitry allows true constant color with a h.

AT9932 : The AT9932 is an advanced fixed frequency PWM controller IC designed to control an LED lamp driver using a boost-buck topology that can step the input voltage up or down automatically. The IC provides fast output current transient response and very low susceptibility to input voltage transients, which allows the lamp driver to pass the rigorous electrical transient requirements of SAE J1455 or ISO 7637-2, making the AT9932 an ultimate solution for automobile lighting. Capacitive isolation protects the LED Lamp from failure of the switching MOSFET. The AT9932 features a unique feed-forward current control scheme, differential output current sensing, soft start, protection from short or open L.

AT9932 : The AT9932 is an advanced fixed-frequency PWM controller IC designed to control an LED lamp driver using a boost-buck topology that can step the input voltage up or down automatically. The IC provides fast output current transient response and very low susceptibility to input voltage transients. This allows the lamp driver to pass the rigorous electrical transient requirements of SAE J1455 or ISO 7637-2, making the AT9932 an ultimate solution for automobile lighting. Capacitive isolation protects the LED Lamp from failure of the switching MOSFET. The AT9932 features a unique feed-forward current control scheme, differential output current sensing, soft start and protection from short or open.

AT9933 : The AT9933 is a variable frequency PWM controller IC, designed to control an LED lamp driver using a low-noise boost-buck (Ćuk) topology. It uses patent-pending Hysteretic Current-mode control to regulate both the input and the output currents. This enables superior input surge immunity without the necessity for complex loop compensation. Input current control enables current limiting during Startup, Input Undervoltage and Output Overload conditions. The AT9933 provides a low-frequency PWM dimming input that can accept an external control signal with a duty cycle of 0%-100% and a high dimming ratio. This AT9933-based LED driver is ideal for LED lamps. The part is rated for up to 125°C ambien.

AT9933 : The AT9933 is a variable frequency PWM controller IC, designed to control an LED lamp driver using a low-noise boost-buck (Ćuk) topology. The AT9933 uses patent-pending hysteretic current-mode control to regulate both the input and the output currents. This enables superior input surge immunity without the necessity for complex loop compensation. Input current control enables current limiting during startup, input under-voltage and output overload conditions. The AT9933 provides a low-frequency PWM dimming input that can accept an external control signal with a duty cycle of 0 - 100% and a high dimming ratio. The AT9933 based LED driver is ideal for automotive LED lamps. The part is rated fo.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)