DatasheetsPDF.com

GS2964

Gennum
Part Number GS2964
Manufacturer Gennum
Description Adaptive Cable Equalizer
Published Sep 28, 2016
Detailed Description GS2964 Adaptive Cable Equalizer Key Features • SMPTE 424M, SMPTE 292M and SMPTE 259M compliant • Automatic cable equaliz...
Datasheet PDF File GS2964 PDF File

GS2964
GS2964

Overview
GS2964 Adaptive Cable Equalizer Key Features • SMPTE 424M, SMPTE 292M and SMPTE 259M compliant • Automatic cable equalization • Multi-standard operation from 143Mb/s to 2.
97Gb/s • Performance optimized for 270Mb/s, 1.
485Gb/s and 2.
97Gb/s.
Typical equalized length of Belden 1694A cable: Š 100m at 2.
97Gb/s Š 140m at 1.
485Gb/s Š 180m at 270Mb/s • Supports DVB-ASI at 270Mb/s • Manual bypass (useful for low data rates with slow rise/fall times) • Programmable carrier detect with squelch threshold adjustment • Standard EIA/JEDEC logic control and status signal levels • Single 3.
3V power supply operation • 215mW power consumption (typical) • Wide temperature range of -40ºC to +85ºC • Small footprint QFN package (4mm x 4mm) Š Drop-in compatible with the GS2974 • Pb-free and RoHS compliant Applications • SMPTE 424M, SMPTE 292M and SMPTE 259M coaxial cable serial digital interfaces Description The GS2964 is a high-speed BiCMOS integrated circuit designed to equalize and restore signals received over 75Ω coaxial cable.
The device is designed to support SMPTE 424M, SMPTE292M and SMPTE 259M, and is optimized for performance at 270Mb/s, 1.
485Gb/s and 2.
97Gb/s.
The GS2964 features DC restoration to compensate for the DC content of SMPTE pathological test patterns.
The Carrier Detect output pin (CD) indicates whether a valid input signal has been detected.
It can be connected directly to the MUTE pin to mute the output on loss of carrier.
A voltage programmable threshold, which can be changed via the SQ_ADJ pin, forces CD high when the input signal amplitude falls below the threshold.
This allows the GS2964 to distinguish between low-amplitude SDI signals and noise at the input of the device.
The equalizing and DC restore stages are disengaged when the BYPASS pin is HIGH.
No equalization occurs in Bypass mode.
The differential outputs can be DC-coupled to Gennum 3.
3V cable drivers and reclockers and to other industry-standard 3.
3V CML logic.
The GS2964 is footprint and drop-in com...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)