DatasheetsPDF.com

GS82582D38GE

GSI Technology
Part Number GS82582D38GE
Manufacturer GSI Technology
Description 288Mb SigmaQuad-II+ SRAM
Published Oct 13, 2016
Detailed Description 165-Bump BGA Commercial Temp Industrial Temp GS82582D20/38GE-550/500/450/400 288Mb SigmaQuad-II+ Burst of 4 SRAM 550 ...
Datasheet PDF File GS82582D38GE PDF File

GS82582D38GE
GS82582D38GE

Overview
165-Bump BGA Commercial Temp Industrial Temp GS82582D20/38GE-550/500/450/400 288Mb SigmaQuad-II+ Burst of 4 SRAM 550 MHz–400 MHz 1.
8 V VDD 1.
8 V or 1.
5 V I/O Features • 2.
5 Clock Latency • Simultaneous Read and Write SigmaQuad™ Interface • JEDEC-standard pinout and package • Dual Double Data Rate interface • Byte Write controls sampled at data-in time • Burst of 4 Read and Write • On-Die Termination (ODT) on Data (D), Byte Write (BW), and Clock (K, K) intputs • 1.
8 V +100/–100 mV core power supply • 1.
5 V or 1.
8 V HSTL Interface • Pipelined read operation • Fully coherent read and write pipelines • ZQ pin for programmable output drive strength • Data Valid Pin (QVLD) Support • IEEE 1149.
1 JTAG-compliant Boundary Scan • RoHS-compliant 165-bump BGA package SigmaQuad™ Family Overview The GS82582D20/38GE are built in compliance with the SigmaQuad-II+ SRAM pinout standard for Separate I/O synchronous SRAMs.
They are 301,989,888-bit (288Mb) SRAMs.
The GS82582D20/38GE SigmaQuad SRAMs are just one element in a family of low power, low voltage HSTL I/O SRAMs designed to operate at the speeds needed to implement economical high performance networking systems.
Clocking and Addressing Schemes The GS82582D20/38GE SigmaQuad-II+ SRAMs are synchronous devices.
They employ two input register clock inputs, K and K.
K and K are independent single-ended clock inputs, not differential inputs to a single differential clock input buffer.
Each internal read and write operation in a SigmaQuad-II+ B4 RAM is four times wider than the device I/O bus.
An input data bus de-multiplexer is used to accumulate incoming data before it is simultaneously written to the memory array.
An output data multiplexer is used to capture the data produced from a single memory array read and then route it to the appropriate output drivers as needed.
Therefore the address field of a SigmaQuad-II+ B4 RAM is always two address pins less than the advertised index depth (e.
g.
, the 16M x 18 has a 4M addressable in...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)