DatasheetsPDF.com

S25FL128P

Cypress Semiconductor
Part Number S25FL128P
Manufacturer Cypress Semiconductor
Description 128-Mb 3.0 V Flash Memory
Published Nov 5, 2016
Detailed Description S25FL128P 128-Mbit, 3.0 V Flash Memory This product is not recommended for new and current designs. For new and current...
Datasheet PDF File S25FL128P PDF File

S25FL128P
S25FL128P

Overview
S25FL128P 128-Mbit, 3.
0 V Flash Memory This product is not recommended for new and current designs.
For new and current designs, S25FL128S supersedes S25FL128P.
This is the factory-recommended migration path.
Please refer to the S25FL128S data sheet for specifications and ordering information.
Distinctive Characteristics Architectural Advantages  Single power supply operation – Full voltage range: 2.
7V to 3.
6V read and program operations  Memory Architecture – 128Mb uniform 256 KB sector product – 128Mb uniform 64 KB sector product  Program – Page Program (up to 256 bytes) in 1.
5 ms (typical) – Faster program time in Accelerated Programming mode (8.
5 V–9.
5 V on #WP/ACC) in 1.
2 ms (typical)  Erase – 2 s typical 256 KB sector erase time – 0.
5 s typical 64 KB sector erase time – 128 s typical bulk erase time – Sector erase (SE) command (D8h) for 256 KB sectors; (20h or D8h) for 64KB sectors – Bulk erase command (C7h) for 256 KB sectors; (60h or C7h) for 64KB sectors  Cycling Endurance – 100,000 cycles per sector typical  Data Retention – 20 years typical  Device ID – RDID (9Fh), READ_ID (90h) and RES (ABh) commands to read manufacturer and device ID information – RES command one-byte electronic signature for backward compatibility  Process Technology – Manufactured on 0.
09 µm MirrorBit® process technology  Package Option – Industry Standard Pinouts – 16-pin SO package (300 mils) – 8-Contact WSON Package (6 x 8 mm) Performance Characteristics  Speed – 104 MHz clock rate (maximum)  Power Saving Standby Mode – Standby Mode 200 µA (max) – Deep Power Down Mode 3 µA (typical) Memory Protection Features  Memory Protection – WP#/ACC pin works in conjunction with Status Register Bits to protect specified memory areas – 256 KB uniform sector product: Status Register Block Protection bits (BP2, BP1, BP0) in status register configure parts of memory as read-only.
– 64KB uniform sector product: Status Register Block Protection bits (BP3, BP2, BP1, BP0) in status regi...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)