DatasheetsPDF.com

HD6789 Datasheet PDF

Coilcraft
Part Number HD6789
Manufacturer Coilcraft
Title HDSL Transformers
Description Document 201-1 HDSL Transformers This product is not RoHS-compliant. Contact Coilcraft for current status or possible alternatives. These HDSL tra...
Features ...

File Size 186.08KB
Datasheet PDF File HD6789 PDF File


HD6789 HD6789 HD6789




Similar Ai Datasheet

HD6.8Mxx : HIGH–FREQ ALUMINUM ELECTROLYTIC HD SERIES SUBMINIATURE (Radial Lead, Horizontal Deflection) The NTE HD series of aluminum electrolytic non–polarized capacitors are designed specifically for horizontal deflection current correction where high frequency and high ripple current occur. MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL–STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, NTE identification. Recommended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such.

HD60N03 : HD60N03_HU60N03 Nov 2009 HD60N03 / HU60N03 30V N-Channel MOSFET BVDSS = 30 V RDS(on) = 9mΩ ID = 60 A FEATURES  Originative New Design  Superior Avalanche Rugged Technology  Robust Gate Oxide Technology  Very Low Intrinsic Capacitances  Excellent Switching Characteristics  Unrivalled Gate Charge : 18.5 nC (Typ.)  Extended Safe Operating Area  Lower RDS(ON) : 9mΩ (Typ.) @V GS=10V  100% Avalanche Tested TO-252 TO-251 HD60N03 HU60N03 1.Gate 2. Drain 3. Source Absolute Maximum Ratings TC=25℃ unless otherwise specified Symbol Parameter Value VDSS ID IDM VGS EAS IAR EAR dv/dt Drain-Source Voltage Drain Current Drain Current Drain Current – Continuous (TC = 25℃) – Continuou.

HD61100A : The HD61100A is a driver LSI for liquid crystal display systems. It receives serial display data from a display control LSI, HD61830, etc., and generates liquid crystal driving signals. It has liquid crystal driving outputs which correspond to internal 80-bit flip/flops. Both static drive and dynamic drive are possible according to the combination of transfer clock frequency and latch clock frequency. Features • Liquid crystal display driver with serial/parallel conversion function • Internal liquid crystal display driver: 80 drivers • Display duty cycle Any duty cycle is selectable according to combination of transfer clock and latch clock • Data transfer rate: 2.5 MHz max. • Power supply .

HD61102 : HD61102 is a column (segment) driver for dot matrix liquid crystal graphic display systems. It stores the display data transferred from a 8-bit micro-controller in internal display RAM and generates dot matrix liquid crystal driving signals. Each bit data of display RAM corresponds to on/off state of each dot of a liquid crystal display to provide more flexible than character display. As it is internally equipped with 64 output drivers for display, it is available for liquid crystal graphic displays with many dots. The HD61102, which is produced by the CMOS process, can complete a portable battery drive equipment in combination with a CMOS microcontroller, utilizing the liquid crystal displa.

HD61103A : The HD61103A is a common signal driver for dot matrix liquid crystal graphic display systems. It generates the timing signals (switch signal to convert LCD waveform to AC, frame synchronous signal) and supplies them to the column driver to control display. It provides 64 driver output lines and the impedance is low enough to drive a large screen. As the HD61103A is produced by a CMOS process, it is fit for use in portable battery drive equipments utilizing the liquid crystal display’s low power consumption. The user can easily construct a dot matrix liquid crystal graphic display system by combining the HD61103A and the column (segment) driver HD61102. Features • Dot matrix liquid crystal g.

HD61200 : The HD61200 is a column driver LSI for a largearea dot matrix LCD. It employs 1/32 or more duty cycle multiplexing method. It receives serial display data from a micro controller or a display control LSI, HD61830, etc., and generates liquid crystal driving signals. Features • Liquid crystal display driver with serial/parallel conversion function • Internal liquid crystal display driver: 80 drivers • Drives liquid crystal panels with 1/32–1/128 duty cycle multiplexing • Can interface to LCD controllers, HD61830 and HD61830B • Data transfer rate: 2.5 MHz max • Power supply: VCC: 5 V ± 10% (internal logic) • Power supply voltage for liquid crystal display drive: 8 V to 17 V • CMOS process Ord.

HD61202 : HD61202 is a column (segment) driver for dot matrix liquid crystal graphic display systems. It stores the display data transferred from a 8-bit micro controller in the internal display RAM and generates dot matrix liquid crystal driving signals. Each bit data of display RAM corresponds to on/off state of a dot of a liquid crystal display to provide more flexible than character display. As it is internally equipped with 64 output drivers for display, it is available for liquid crystal graphic displays with many dots. The HD61202, which is produced in the CMOS process, can complete portable battery drive equipment in combination with a CMOS microcontroller, utilizing the liquid crystal display.

HD61202U : HD61202U is a column (segment) driver for dot matrix liquid crystal graphic display systems. It stores the display data transferred from a 8-bit micro controller in the internal display RAM and generates dot matrix liquid crystal driving signals. Each bit data of display RAM corresponds to on/off state of a dot of a liquid crystal display to provide more flexible than character display. As it is internally equipped with 64 output drivers for display, it is available for liquid crystal graphic displays with many dots. The HD61202U, which is produced in the CMOS process, can complete portable battery drive equipment in combination with a CMOS micro-controller, utilizing the liquid crystal disp.

HD61203 : The HD61203 is a common signal driver for dot matrix liquid crystal graphic display systems. It generates the timing signals (switch signal to convert LCD waveform to AC, frame synchronous signal) and supplies them to the column driver to control display. It provides 64 driver output lines and the impedance is low enough to drive a large screen. As the HD61203 is produced by a CMOS process, it is fit for use in portable battery-driven equipment utilizing the liquid crystal display’s low power consumption. The user can easily construct a dot matrix liquid crystal graphic display system by combining the HD61203 and the column (segment) driver HD61202. Features • Dot matrix liquid crystal grap.

HD61203U : The HD61203U is a common signal driver for dot matrix liquid crystal graphic display systems. It generates the timing signals (switch signal to convert LCD waveform to AC, frame synchronous signal) and supplies them to the column driver to control display. It provides 64 driver output lines and the impedance is low enough to drive a large screen. As the HD61203U is produced by a CMOS process, it is fit for use in portable battery-driven equipment utilizing the liquid crystal display’s low power consumption. The user can easily construct a dot matrix liquid crystal graphic display system by combining the HD61203U and the column (segment) driver HD61202U. Features • • • • • Dot matrix liquid .

HD613901 : .

HD614042 : .

HD614043 : .

HD614045 : .

HD614048 : .

HD614081 : .

HD614089 : .




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)