DatasheetsPDF.com

ET7273C Datasheet PDF


Part Number ET7273C
Manufacturer ETIC
Title QUAD DIFFERENTIAL LINE DRIVER IC
Description These line drivers are similar in function to the ET7272, only in an open-collector format. The VCC pin powers the internal logic only. Output vol...
Features
• Supply Voltage Range 3.5V to 30V
• Operation to 800KHz
• CMOS and TTL Compatible Inputs
• Outputs RS-422A Compatible
• High Impedance Buffered Inputs with Hysteresis
• NPN Open-Collector outputs
• 80mA peak SINK current
• Outputs Protected by Thermal Shut-Down
• ESD protection to 1KV, HBM
• MSL le...

File Size 70.93KB
Datasheet ET7273C PDF File








Similar Ai Datasheet

ET720 : www.DataSheet4U.com 05165 ET720 Only One Name Means ProT ek’Tion™ STEERING DIODE ARRA Y APPLICA TIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) FEA TURES ✔ ESD Protection 40 kilovolts ✔ Provides 14 Lines of Protection ✔ LOW LEAKAGE CURRENT 20nA ✔ ULTRA LOW CAPACITANCE: 3pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-16 ✔ Weight 0.15 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Part .

ET7207 : Etek Microelectronics ET7207 7 CMOS 7 。 7 :63Hz,160Hz,400Hz, 1kHz,2.5kHz,6.25kHz, 16kHz。 7 , 。。 。。。 2.7V 5.5V , 5V。( 1mA),。 Reset Strobe 。 z z z HGND z z 3.3V 5V z 20dB z z z :SOP8(ET7207) z z z Hi-Fi VDDA 1 VSSA 2 OUT 3 STROBE 4 8 C KIN 7 R ESET 6 GND 5 IN Rev 1.0 2007-11-20 1/4 1 2 3 4 5 6 7 8 ET7207 VDD GND OUT STROBE IN HGND RESET CKIN 1/2 VDD Rev 1.0 2007-11-20 2/4 ET7207 Reset Strobe 。 Reset ,。 Reset , 。 Strobe ,63Hz OUT 。 Strobe (63Hz,160Hz,400Hz,1kHz,2.5kHz,6.25kHz,16kHz), 。 Strobe 。 Q VDD IDD IO ZO VOS AV Q FCLK ZIN +6 -60~+150 0~70 1M 2.7 0.5 Vin=100mVpp,fin=1kHz Vin=0.3Vpp,fin=1kHz C=33pF,R=200kohms.

ET7208 : ADC 7:0 adc_one 00h R 63Hz ADC ADC 7:0 adc_two 00h R 160Hz ADC 7:0 adc_three 00h ADC R 400Hz ADC ADC 7:0 adc_four 00h R 1KHz ADC ADC 7:0 adc_five 00h R 2.5KHz ADC ADC 7:0 adc_six 00h R 6.25KHz ADC 7:0 adc_seven 00h ADC R 12KHz ADC 7:0 adc_eight 00h R 7 ADC 2 Addr: 08h Data Set Register Bit Bit Name Default Access 1:0 mdsel 00b R/W Description () 00 01 ADC 10 000 0db 001 6db 010 12db 4:2 gc 000b R/W 011 18db 100 -6db 101 -12db 110 -18db 111 X 6:5 xx xx xx Don’t care 7 shutdown 1b R/W 0 1 :mdsel : (1) 00,;(2) 10,;(3) 01, ADC 。 Rev 1.0 2009-10-14 6/8 ET7208 4 ( 00H) Addr: 0Ah Bit Bit Name .

ET721 : www.DataSheet4U.com 05124 ET721 Only One Name Means ProT ek’Tion™ STEERING DIODE ARRA Y APPLICA TIONS ✔ Ethernet - 10/100/1000 Base T ✔ Set Top Box Interfac ✔ Handheld Electronics ✔ FireWire ✔ USB Interface ✔ Sensor Interface IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) FEA TURES ✔ ESD Protection 40 kilovolts ✔ Low Clamping Voltage ✔ Provides Six (6) Lines of Protection ✔ LOW LEAKAGE CURRENT 200nA ✔ ULTRA LOW CAPACITANCE: 3pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 0.1 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 12mm .

ET7222 : The ET7222 is 2­ to 1­port analog switches. Their wide bandwidth and low bit­to­bit skew allow them to pass high­speed differential signals with good signal integrity. Each switch is bidirectional and offers little or no attenuation of the high­ speed signals at the outputs. Industry­leading advantages include a propagation delay of less than 250 ps, resulting from its low channel resistance and low I/O capacitance. Their high channel­to­channel crosstalk rejection results in minimal noise interference. Their bandwidth is wide enough to pass High­Speed USB 2.0 differential signals (480 Mb/s). Features RON is Typically 6.0Ω at VCC = 3.3 V Low Bit­to­Bit Skew: Typically 50 ps Low Crosstalk: ­4.

ET723 : www.DataSheet4U.com 05174 ET723 Only One Name Means ProT ek’Tion™ STEERING DIODE ARRA Y APPLICA TIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) FEA TURES ✔ ESD Protection 40 kilovolts ✔ Low Clamping Voltage ✔ Provides Six (6) Lines of Protection ✔ LOW LEAKAGE CURRENT 200nA ✔ ULTRA LOW CAPACITANCE: 5pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Weight 0.1 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA St.

ET724 : www.DataSheet4U.com 05125 ET724 Only One Name Means ProT ek’Tion™ STEERING DIODE ARRA Y APPLICA TIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Set Top Box Interface ✔ Sensor Interface ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) FEA TURES ✔ ESD Protection 40 kilovolts ✔ Low Clamping Voltage ✔ Provides Four (4) Lines of Protection ✔ LOW LEAKAGE CURRENT 100nA ✔ ULTRA LOW CAPACITANCE: 3pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SOT-23-6 ✔ Weight 66 milligrams (Approximate) ✔ Flammabi.

ET7272 : These line drivers are pin compatible with 26LS31 in applications where pin 4 = 5V and pin 12 = GND. Internal clamp diodes allow trouble-free operation when driving cable lengths exceeding 100m. Split supplies are provided to minimize standby power dissipation in high voltage applications. The logic should be powered from a regulated 5V supply at the VccBias pin. The output stages may then be powered by a separate supply at VccDrivers, up to 30V. Output voltage swings of 0.3V to VCC-1.9V are typical. The outputs are protected against shorts to ground, shorts to Vcc and to other outputs, by a two-fold scheme of current limiting and thermal shutdown. This assures highly reliable operation in h.

ET7272B : These line drivers are pin compatible with 26LS31 in applications where pin 4 = 5V and pin 12 = GND. Internal clamp diodes allow trouble-free operation when driving cable lengths exceeding 100m. Split supplies are provided to minimize standby power dissipation in high voltage applications. The logic should be powered from a regulated 5V supply at the VccBias pin. The output stages may then be powered by a separate supply at VccDrivers, up to 30V. Output voltage swings of 0.3V to VCC-1.9V are typical. The outputs are protected against shorts to ground, shorts to Vcc and to other outputs, by a two-fold scheme of current limiting and thermal shutdown. This assures highly reliable operation in h.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)