DatasheetsPDF.com

LPC802

NXP
Part Number LPC802
Manufacturer NXP
Description 32-bit ARM Cortex-M0+ microcontroller
Published May 27, 2019
Detailed Description LPC802 32-bit ARM Cortex-M0+ microcontroller; up to 16 KB flash and 2 KB SRAM; 12-bit ADC; Comparator; Rev. 1.8 — 25 S...
Datasheet PDF File LPC802 PDF File

LPC802
LPC802

Overview
LPC802 32-bit ARM Cortex-M0+ microcontroller; up to 16 KB flash and 2 KB SRAM; 12-bit ADC; Comparator; Rev.
1.
8 — 25 September 2019 Product data sheet 1.
General description The LPC802 is an ARM Cortex-M0+ based, low-cost 32-bit MCU family of processors operating at CPU frequencies of up to 15 MHz.
The LPC802 supports 16 KB of flash memory and 2 KB of SRAM.
The peripheral complement of the LPC802 includes one I2C-bus interface, up to two USARTs, one SPI interface, one multi-rate timer, self-wake-up timer, one general purpose 32-bit counter/timer, one 12-bit ADC, one analog comparator, function-configurable I/O ports through a switch matrix, and up to 17 general-purpose I/O pins.
For additional documentation related to the LPC802 parts, see Section 19 “References”.
2.
Features and benefits  System:  ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 15 MHz with single-cycle multiplier and fast single-cycle I/O port.
 ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
 System tick timer.
 AHB multilayer matrix.
 Serial Wire Debug (SWD) with four break points and two watch points.
JTAG boundary scan (BSDL) supported.
 Memory:  16 KB on-chip EEPROM based flash programming memory.
 Code Read Protection (CRP).
 2 KB SRAM.
 Dual I/O power (LPC802M011JDH20):  Independent supplies on each package side permitting level-shifting signals from one off-chip voltage domain to another and/or interfacing directly to off-chip peripherals operating at different supply levels.
 The switch matrix provides level shifter functionality to allow up to two selected signals to be routed from user-selected pins in one voltage domain to selected pins in the alternate domain.
This feature can also be used on a single supply device if voltage level shifting is not required.
 ROM API support:  Boot loader.
 Supports Flash In-Application Programming (IAP).
 Supports In-System Programming (ISP) through USART.
NXP Semiconductors LPC802 3...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)