DatasheetsPDF.com

SAM9X60

Microchip
Part Number SAM9X60
Manufacturer Microchip
Description SIP MPU
Published Nov 24, 2019
Detailed Description SAM9X60 Ultra-Low Power Arm® ARM926EJ-S™ Processor-Based MPU, 600 MHz, Camera, LCD, 2D Graphics, Dual 10/100 Ethernet, C...
Datasheet PDF File SAM9X60 PDF File

SAM9X60
SAM9X60

Overview
SAM9X60 Ultra-Low Power Arm® ARM926EJ-S™ Processor-Based MPU, 600 MHz, Camera, LCD, 2D Graphics, Dual 10/100 Ethernet, CAN, USB, QSPI, FLEXCOMs, AES, SHA Introduction The SAM9X60 is a high-performance, ultra-low power ARM926EJ-S CPU-based embedded microprocessor (MPU) running up to 600 MHz, with support for multiple memories such as SDRAM, LP-SDRAM, LPDDR, DDR2, and QSPI and e.
MMC Flash.
The device integrates powerful peripherals for connectivity and user interface applications, and offers security functions (tamper detection, secure boot program, secure key storage, etc.
), TRNG, as well as high-performance crypto accelerators for AES and SHA.
Features • CPU running up to 600 MHz – ARM926EJ-S Arm Thumb® processor – 32-Kbyte data cache, 32-Kbyte instruction cache, Memory Management Unit (MMU) • Memories – One 160-Kbyte internal ROM • 64-Kbyte internal ROM embedding a secure bootloader program supporting boot on NAND Flash, SD Card, SPI or QSPI Flash.
Bootloader features selectable by OTP bits • 96-Kbyte ROM for NAND Flash BCH ECC table – One 64-Kbyte internal SRAM (SRAM0), single-cycle access at system speed – High-bandwidth Multi-port DDR2/LPDDR Controller – 32/16-bit External Bus Interface (EBI) supporting 8/4-bank DDR2/LPDDR, 4/2-bank SDR/LPSDR, static memories, with scrambling – NAND Flash Controller, with up to 24-bit Programmable Multi-bit Error Correcting Code – One 11-Kbyte OTP memory for secure key storage with emulation mode (OTP bits are emulated by a 4-Kbyte SRAM (SRAM1)) • System Running up to 200 MHz – Power-on reset cells, Reset Controller, Shutdown Controller, Periodic Interval Timer, Watchdog Timer running on internal slow RC oscillator (32 kHz typical) and Real Time Clock running on slow crystal oscillator (32.
768 kHz) – Two internal trimmed RC oscillators with typical values: 32 kHz (slow) and 12 MHz (fast) – Two crystal oscillators: 32.
768 kHz (slow) and 12 to 48 MHz (fast) – One PLL for the system and one PLL optimized for USB high-speed operatio...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)