DatasheetsPDF.com

bq24704


Part Number bq24704
Manufacturer Texas Instruments
Title Host-Controlled Li-Ion and Li-Polymer Battery Charger
Description The bq24704 is a high-efficiency, synchronous battery charger with integrated compensation offering low component count for space-limited Li-Ion a...
Features 1
•2 NMOS-NMOS Synchronous Buck Converter with 300 kHz Frequency and 95% Efficiency
• 30-ns Minimum Driver Dead-time and 99.5% Maximum Effective Duty Cycle
• High-Accuracy Voltage and Current Regulation
  – ±0.5% Charge Voltage Accuracy
  – ±3% Charge Current Accuracy
  – ±3% Adapter Current Accuracy
  – ±...

File Size 2.55MB
Datasheet bq24704 PDF File








Similar Ai Datasheet

bq24702 : The bq24702/bq24703 is a highly integrated battery charge controller and selector tailored for notebook and sub-notebook PC applications. The bq24702/bq24703 uses dynamic power management (DPM) to minimize battery charge time by maximizing use of available wall-adapter power. This is achieved by dynamically adjusting the battery charge current based on the total system (adapter) current. The bq24702/bq24703 uses a fixed frequency, pulse width modulator (PWM) to accurately control battery charge current and voltage. Charge current limits can be programmed from a keyboard controller DAC or by external resistor dividers from the precision 5-V, ±0.6%, externally bypassed voltage reference (VREF).

bq24703 : The bq24702/bq24703 is a highly integrated battery charge controller and selector tailored for notebook and sub-notebook PC applications. The bq24702/bq24703 uses dynamic power management (DPM) to minimize battery charge time by maximizing use of available wall-adapter power. This is achieved by dynamically adjusting the battery charge current based on the total system (adapter) current. The bq24702/bq24703 uses a fixed frequency, pulse width modulator (PWM) to accurately control battery charge current and voltage. Charge current limits can be programmed from a keyboard controller DAC or by external resistor dividers from the precision 5-V, ±0.6%, externally bypassed voltage reference (VREF).

bq24705 : The bq24705 is a high-efficiency, synchronous battery charger with integrated compensation, offering low component count for space-limited multi-chemistry battery charging applications. Charge current and voltage programming allows high regulation accuracies, and can be either hardwired with resistors, or programmed by the system power-management microcontroller using a DAC or GPIOs. The bq24705 charges two, three, or four series Li+ cells, supporting up to 8 A of charge current, and is available in a 24-pin, 4x4-mm thin QFN package. BTST HIDRV PH REGN LODRV PGND PVCC 1 CHGEN 2 ACN 3 ACP 4 ACDET 5 ACSET 6 24 23 22 21 20 19 bq24705 QFN-24 TOP VIEW 18 DPMDET 17 CELLS 16 SRP 15 SRN 14 BAT 1.

bq24707 : The bq24707 and bq24707A devices are highefficiency, synchronous battery chargers, offering low component count for space-constrained, multichemistry battery charging applications. SMBus controlled input current, charge current, and charge voltage DACs allow for very high regulation accuracies that can be easily programmed by the system power management micro-controller. The IC uses the internal input current register or external ILIM pin to throttle down PWM modulation to reduce the charge current. The IC provides an IFAULT output to alarm if any MOSFET fault or input over current occurs. This alarm output allows users to turn off input power selectors when the fault occurs. Meanwhile, an i.

bq24707A : The bq24707 and bq24707A devices are highefficiency, synchronous battery chargers, offering low component count for space-constrained, multichemistry battery charging applications. SMBus controlled input current, charge current, and charge voltage DACs allow for very high regulation accuracies that can be easily programmed by the system power management micro-controller. The IC uses the internal input current register or external ILIM pin to throttle down PWM modulation to reduce the charge current. The IC provides an IFAULT output to alarm if any MOSFET fault or input over current occurs. This alarm output allows users to turn off input power selectors when the fault occurs. Meanwhile, an i.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)