DatasheetsPDF.com

DAC0802

Texas Instruments
Part Number DAC0802
Manufacturer Texas Instruments
Description 8-Bit Digital-to-Analog Converters
Published Mar 16, 2020
Detailed Description DAC0800, DAC0802 www.ti.com SNAS538C – JUNE 1999 – REVISED FEBRUARY 2013 DAC0800/DAC0802 8-Bit Digital-to-Analog Conv...
Datasheet PDF File DAC0802 PDF File

DAC0802
DAC0802

Overview
DAC0800, DAC0802 www.
ti.
com SNAS538C – JUNE 1999 – REVISED FEBRUARY 2013 DAC0800/DAC0802 8-Bit Digital-to-Analog Converters Check for Samples: DAC0800, DAC0802 FEATURES 1 •2 Fast Settling Output Current: 100 ns • Full Scale Error: ±1 LSB • Nonlinearity Over Temperature: ±0.
1% • Full Scale Current Drift: ±10 ppm/°C • High Output Compliance: −10V to +18V • Complementary Current Outputs • Interface Directly with TTL, CMOS, PMOS and Others • 2 Quadrant Wide Range Multiplying Capability • Wide Power Supply Range: ±4.
5V to ±18V • Low Power Consumption: 33 mW at ±5V • Low Cost DESCRIPTION The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns.
When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible.
The DAC0800 series also features high compliance complementary current outputs to allow differential output voltages of 20 Vp-p with simple resistor loads.
The reference-to-full-scale current matching of better than ±1 LSB eliminates the need for full-scale trims in most applications, while the nonlinearities of better than ±0.
1% over temperature minimizes system error accumulations.
The noise immune inputs will accept a variety of logic levels.
The performance and characteristics of the device are essentially unchanged over the ±4.
5V to ±18V power supply range and power consumption at only 33 mW with ±5V supplies is independent of logic input levels.
The DAC0800, DAC0802, DAC0800C and DAC0802C are a direct replacement for the DAC-08, DAC-08A, DAC-08C, and DAC-08H, respectively.
For single supply operation, refer to AN-1525.
Typical Application Pin numbers represent the PDIP package.
The SOIC package pin numbers differ from that of the PDIP package.
Figure 1.
±20 VP-P Output Digital-to-Analog Converter These devices have limited built-in ESD protection.
The leads should be shorted together or the device placed in conductive foam during...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)