DatasheetsPDF.com

EZ-PDCCG4

Part Number	EZ-PDCCG4
Manufacturer	Cypress Semiconductor
Description	USB Type-C Port Controller
Published	Apr 6, 2020
Detailed Description	PRELIMINARY EZ-PD CCG4 USB Type-C Port Controller EZ-PD CCG4, USB Type-C Port Controller General Description EZ-PD™ ...
Datasheet	EZ-PDCCG4 PDF File

Overview

PRELIMINARY EZ-PD CCG4 USB Type-C Port Controller EZ-PD CCG4, USB Type-C Port Controller General Description EZ-PD™ CCG4 is a dual USB Type-C controller that complies with the latest USB Type-C and PD standards.
EZ-PD CCG4 provides a complete dual USB Type-C and USB-Power Delivery port control solution for notebooks, power adapters and docking stations.
It can also be used in dual role and downstream facing port applications.
EZ-PD CCG4 uses Cypress’s proprietary M0S8 technology with a 32-bit, 48-MHz Arm® Cortex®-M0 processor with 128 KB flash and integrates two complete Type-C Transceivers including the Type-C termination resistors RP and RD.
Applications ■ Notebooks ■ Power adapters ■ Docking stations Features 32-bit MCU Subsystem ■ 48-MHz Arm Cortex-M0 CPU ■ 128-KB Flash ■ 8-KB SRAM Integrated Digital Blocks ■ Up to four integrated timers and counters to meet response times required by the USB-PD protocol ■ Four run-time serial re-configurable I2C, communication blocks (SCBs) SPI, or UART functionality with Clocks and Oscillators ■ Integrated oscillator eliminating the need for external clock ■ Integrated dead battery termination for DRP (Power Source/Sink) applications ■ Supports two USB Type-C ports ■ Integrated VCONN FETs to power EMCA cables ■ Integrated fast role swap and extended data messaging (not supported for 33-ball CSP part) Low-Power Operation ■ 2.
7-V to 5.
5-V operation ■ Independent supply voltage pin for GPIO that allows 1.
71-V to 5.
5-V signaling on the I/Os ■ Reset: 1.
0 µA, Deep Sleep: 2.
5 µA, Sleep: 2.
5 mA System-Level ESD on CC Pins ■ ± 8-kV Contact Discharge and ±15-kV Air Gap Discharge based on IEC61000-4-2 level 4C (on 40-pin QFN and 33-ball CSP only) Hot Swappable I/Os ■ Port 0 I2C pins and CC1, CC2 pins are hot-swappable Type-C and USB-PD Support ■ Integrated USB Power Delivery 3.
0 support (only PD 2.
0 support for 33-ball CSP part) ■ Two integrated USB-PD BMC transceivers ■ Integrated UFP[1] (RD) and current sources for DFP...

Similar Datasheet

EZ-PDCCG4 USB Type-C Port Controller - Cypress Semiconductor

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)