DatasheetsPDF.com

S9KEAZ64AVLH

NXP
Part Number S9KEAZ64AVLH
Manufacturer NXP
Description 32-bit MCU
Published May 14, 2020
Detailed Description S9KEA128P80M48SF0 KEA128 Sub-Family Data Sheet Supports the following: S9KEAZ64AMLK(R), S9KEAZ128AMLK(R), S9KEAZ64AVLK...
Datasheet PDF File S9KEAZ64AVLH PDF File

S9KEAZ64AVLH
S9KEAZ64AVLH

Overview
S9KEA128P80M48SF0 KEA128 Sub-Family Data Sheet Supports the following: S9KEAZ64AMLK(R), S9KEAZ128AMLK(R), S9KEAZ64AVLK(R), S9KEAZ128AVLK(R), S9KEAZ64ACLK(R), S9KEAZ128ACLK(R), S9KEAZ64AMLH(R), S9KEAZ128AMLH(R), S9KEAZ64AVLH(R), S9KEAZ128AVLH(R), S9KEAZ64ACLH(R) and S9KEAZ128ACLH(R) Rev.
6 — 30 January 2024 Data sheet 1 Key features 1.
1 Operating characteristics • Voltage range: 2.
7 to 5.
5 V • Flash write voltage range: 2.
7 to 5.
5 V • Temperature range (ambient): -40 to 125°C 1.
2 Performance • Up to 48 MHz Arm® Cortex-M0+ core • Single cycle 32-bit x 32-bit multiplier • Single cycle I/O access port 1.
3 Memories and memory interfaces • Up to 128 KB flash • Up to 16 KB RAM 1.
4 Clocks • Oscillator (OSC) - supports 32.
768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; choice of low power or high gain oscillators • Internal clock source (ICS) - internal FLL with internal or external reference, 37.
5 kHz pre-trimmed internal reference for 48 MHz system clock • Internal 1 kHz low-power oscillator (LPO) 1.
5 System peripherals • Power management module (PMC) with three power modes: Run, Wait, Stop • Low-voltage detection (LVD) with reset or interrupt, selectable trip points • Watchdog with independent clock source (WDOG) • Programmable cyclic redundancy check module (CRC) • Serial wire debug interface (SWD) • Aliased SRAM bitband region (BIT-BAND) • Bit manipulation engine (BME) NXP Semiconductors S9KEA128P80M48SF0 KEA128 Sub-Family Data Sheet 1.
6 Security and integrity modules • 80-bit unique identification (ID) number per chip 1.
7 Human-machine interface • Up to 71 general-purpose input/output (GPIO) • Two 32-bit keyboard interrupt modules (KBI) • External interrupt (IRQ) 1.
8 Analog modules • One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC) • Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP) 1.
9 Timers • One 6-channel FlexTimer/PWM (FTM) • Two 2-channel FlexTimer/PWM (FTM...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)