DatasheetsPDF.com

IP101G

IC Plus
Part Number IP101G
Manufacturer IC Plus
Description Fast Ethernet Transceiver
Published Jan 11, 2021
Detailed Description IP101G Data Sheet Single Port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver (85nm/Extreme Low PW, PWMT® and EMIMT...
Datasheet PDF File IP101G PDF File

IP101G
IP101G


Overview
IP101G Data Sheet Single Port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver (85nm/Extreme Low PW, PWMT® and EMIMT®) Features z 10/100Mbps IEEE 802.
3/802.
3u compliant Fast Ethernet transceiver z Supports 100Base-TX/FX Media Interface z Supports MII/ RMII Interface z Supports Auto MDI/MDIX function z Power Management Tool - APS, auto power saving while Link-off - 802.
3az, protocol based power saving - WOL+, light traffic power saving - PWD, force-off power saving - Supports MII with LPI for RX and TX - Supports RMII with LPI for RX z Supports Base Line Wander compensation z Supports Interrupt function z Built in synchronization FIFO to support jumbo frame size up to 12KB in MII mode (10KB in RMII 100Mbps mode) z Supports MDC and MDIO to communicate with the MAC z EMI Management Tool - F/W based control - 4 levels for mapping the difference layout length on the PCB z Single 3.
3V power supply z Built-in Vcore regulator z DSP-based PHY Transceiver technology z System Debug Assistant Tool - 16 bit RX counter - 9 bit RXError/CRC counter - Isolate MII/RMII - RX to TX Loopback - Loopback MII/RMII z Using either 25MHz crystal/oscillator or 50MHz oscillator REF_CLK as clock source z Built-in 49.
9ohm resistors for simplifying BOM z Flexible LED display z Process: 85nm General Description z Package and operation temperature IP101G: dice, 0~70℃ IP101GA: 48LQFP, 0~70℃ IP101GR: 32QFN, 0~70℃ IP101GRI: 32QFN, -40~85℃ IP101G is an IEEE 802.
3/802.
3u compliant single-port Fast Ethernet Transceiver for both 100Mbps and 10Mbps operations.
It supports Auto MDI/MDIX function to simplify the network installation and reduce the system maintenance cost.
To improve the system performance, IP101G provides a hardware interrupt pin to indicate the link, speed and duplex status change.
IP101G provides Media Independent Interface (MII) or Reduced Media Independent Interface (RMII) to connect with different types of 10/100Mbps Media Access Controller (MAC).
IP101G is designed to use category...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)