DatasheetsPDF.com

TLP2310

Toshiba
Part Number TLP2310
Manufacturer Toshiba
Description Photocoupler
Published Jan 15, 2021
Detailed Description Photocouplers GaAℓAs Infrared LED & Photo IC TLP2310 TLP2310 1. Applications • Programmable Logic Controllers (PLCs) •...
Datasheet PDF File TLP2310 PDF File

TLP2310
TLP2310

Overview
Photocouplers GaAℓAs Infrared LED & Photo IC TLP2310 TLP2310 1.
Applications • Programmable Logic Controllers (PLCs) • Battery Management System (BMS) • Industrial Inverters 2.
General The TLP2310 is a 5-Mbps low-power photocoupler in the small SO6 package.
The TLP2310 consumes supply current (IDDL/IDDH) of only 0.
3 mA maximum over the entire operating temperature range of -40  to 125  and operates at a supply voltage as low as 2.
7 V, contributing to a reduction in power consumption of various systems.
The input forward current can be less than 1 mA maximum, allowing direct drive by a microcontroller.
The detector has a totem-pole output stage with current sourcing and sinking capabilities.
The TLP2310 has an internal Faraday shield that provides a guaranteed common-mode transient immunity of ±25 kV/µs.
3.
Features (1) Package: SO6 (2) Data transfer rate: 5 MBd (typ.
) (NRZ) (3) Supply current: 0.
3 mA (max) (4) Threshold input current: 1.
0 mA (max) (5) Supply voltage: 2.
7 to 5.
5 V (6) Operating temperature: -40 to 125  (7) Propagation delay time: 250 ns (max) (8) Pulse width distortion: 30 ns (max) (9) Isolation voltage: 3750 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.
E67349 cUL-approved: CSA Component Acceptance Service No.
5A File No.
E67349 VDE-approved: EN60747-5-5, EN60065 or EN60950-1 (Note 1) CQC-approved: GB4943.
1, GB8898 Thailand Factory Note 1: When a VDE approved type is needed, please designate the Option (V4).
©2016 Toshiba Corporation 1 Start of commercial production 2015-04 2016-04-13 Rev.
3.
0 4.
Packaging and Pin Assignment 11-4L1S 5.
Internal Circuit (Note) TLP2310 1: Anode 3: Cathode 4: GND 5: VO(Output) 6: VDD Note: A 0.
1-µF bypass capacitor must be connected between pin 6 and pin 4.
6.
Principle of Operation 6.
1.
Truth Table Input H L LED ON OFF Output H L 6.
2.
Mechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation thickness Dimension(Min) Unit 5.
0 mm 5.
0 0.
4 ©2016 To...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)