DatasheetsPDF.com

AW9967


Part Number AW9967
Manufacturer AWINIC
Title Boost WLED Driver
Description  Support 0.3% PWM dimming The AW9967 is a white LED (WLED) driver with l  200mV Reference Voltage  Up to 89% Efficiency for 2P7S LEDs  PWM...
Features GENERAL DESCRIPTION
 Support 0.3% PWM dimming The AW9967 is a white LED (WLED) driver with l
 200mV Reference Voltage
 Up to 89% Efficiency for 2P7S LEDs
 PWM control input for CABC operation
 1.1MHz Switching Frequency
 38V Over-voltage Protection for up to 10 LEDs in Series
 2.7V to 5....

File Size 1.48MB
Datasheet AW9967 PDF File








Similar Ai Datasheet

AW9961 :  2.7 to 5.5V Input Voltage Range  38V Over-voltage Protection for up to 10 LEDs in Series  Innovative CDC Output Drive Technology, Significantly Improve EMI Performance  200mV Reference Voltage  Flexible Digital and PWM White LED Brightness Control  Support EMI performance programmable under 1-wire/PWM mode  Minimum PWM Dimming Duty Cycle: 1%  600kHz Switching Frequency  Over-current and Over-temperature Protection  Built-in Soft-start Limits Inrush Current  Ultra Small 2mm*2mm TDFN-6L package APPLICATIONS  Mobile Phones  Portable Media Players  GPS Receivers The AW9961 is a white LED driver with integrated boost converter. With an internal 40V switch FET, the AW9961 drives u.

AW9962 :  1% PWM dimming current accuracy ±20%  Support 0.3% PWM dimming(VFB.TYP=0.6mV)  PWM control input for CABC operation  1.1MHz Switching Frequency  38V Over-voltage Protection for up to 10 LEDs in Series  Innovative CDC Output Drive Technology, Significantly Improve EMI Performance  200mV Reference Voltage  2.7V to 5.5V Input Voltage Range  Over-current and Over-temperature Protection  Built-in Soft-start Limits Inrush Current  Ultra Small 2mm*2mm TDFN-6L package APPLICATIONS  Mobile Phones  Portable Media Players  PDAs  GPS Receivers The AW9962 is a white LED driver with integrated boost converter. With an internal 40V switch FET, the AW9962 drives up a string of up to 10 LED.

AW9962E :  Support 0.3% PWM dimming The AW9962E is a white LED (WLED) driver with l  PWM control input for CABC operation  1.1MHz Switching Frequency  38V Over-voltage Protection for up to 10 LEDs in Series tia integrated boost converter. The boost converter runs at 1.1MHz fixed switching frequency, with an internal 40V, 2A switch FET, the AW9962E can drive one string (up to 10 LEDs) and parallel LED strings.  200mV Reference Voltage  2.7V to 5.5V Input Voltage Range  Over-current and Over-temperature Protection n The full-scale WLED current can be set by the equation 200mV/RSET. RSET should be changed for e parallel applications. The current of WLED can also be set with duty  Built-in.

AW9963 : l  2.7 to 5.5V Input Voltage Range  38V OVP, 1MHz Switching Frequency  Content Adaptive Backlight Control (CABC)  Adaptive Boost Output to WLED Voltages tia The AW9963 is dual-channel WLED driver which provides highly integrated solutions for single-cell Li-ion battery powered smartphone backlight. The AW9963 built-in a 2A/40V power MOSFET which can drive up to 2p10s WLED diodes with Li-  1% Typical Current Matching and Accuracy  Supports Low to 0.1% Stable PWM Dimming  Up to 9-Bit Dimming Resolution  Up to 90% Efficiency  PFM Mode at Light Load  Built-in WLED Open/Short Protection  Over-current and Over-temperature Protection n ion battery power supply. It also integrates tw.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)