DatasheetsPDF.com

TLV5604ID

Texas Instruments
Part Number TLV5604ID
Manufacturer Texas Instruments
Description Quadruple Digital-to-Analog Converter
Published Jul 11, 2021
Detailed Description TLV5604 2.7-V TO 5.5-V 10-BIT 3-µS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN SLAS176B – DECEMBER 1997 – REV...
Datasheet PDF File TLV5604ID PDF File

TLV5604ID
TLV5604ID

Overview
TLV5604 2.
7-V TO 5.
5-V 10-BIT 3-µS QUADRUPLE DIGITAL-TO-ANALOG CONVERTERS WITH POWER DOWN SLAS176B – DECEMBER 1997 – REVISED JULY 2002 D Four 10-Bit D/A Converters D Programmable Settling Time of 3 µs or 9 µs Typ D TMS320, (Q)SPI, and Microwire Compatible Serial Interface D Internal Power-On Reset D Low Power Consumption: 5.
5 mW, Slow Mode – 5-V Supply 3.
3 mW, Slow Mode – 3-V Supply D Reference Input Buffers D Voltage Output Range .
.
.
2 × the Reference Input Voltage D Monotonic Over Temperature D Dual 2.
7-V to 5.
5-V Supply (Separate Digital and Analog Supplies) description The TLV5604 is a quadruple 10-bit voltage output digital-to-analog converter (DAC) with a flexible 4-wire serial interface.
The 4-wire serial interface allows glueless interface to TMS320, SPI, QSPI, and Microwire serial ports.
The TLV5604 is programmed with a 16-bit serial word comprised of a DAC address, individual DAC control bits, and a 10-bit DAC value.
D Hardware Power Down (10 nA) D Software Power Down (10 nA) D Simultaneous Update applications D Battery Powered Test Instruments D Digital Offset and Gain Adjustment D Industrial Process Controls D Machine and Motion Control Devices D Communications D Arbitrary Waveform Generation D OR PW PACKAGE (TOP VIEW) DVDD 1 PD 2 LDAC 3 DIN 4 SCLK 5 CS 6 FS 7 DGND 8 16 AVDD 15 REFINAB 14 OUTA 13 OUTB 12 OUTC 11 OUTD 10 REFINCD 9 AGND The device has provision for two supplies: one digital supply for the serial interface (via pins DVDD and DGND), and one for the DACs, reference buffers and output buffers (via pins AVDD and AGND).
Each supply is independent of the other, and can be any value between 2.
7 V and 5.
5 V.
The dual supplies allow a typical application where the DAC will be controlled via a microprocessor operating on a 3-V supply (also used on pins DVDD and DGND), with the DACs operating on a 5-V supply.
Of course, the digital and analog supplies can be tied together.
The resistor string output voltage is buffered by a x2 gain rail-to-...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)