DatasheetsPDF.com

FT2233HP

Part Number	FT2233HP
Manufacturer	FTDI
Description	High Speed USB Bridge
Published	Jul 13, 2021
Detailed Description	FT2233HP/FT2232HP Datasheet Version 1.2 Document No.: FT_001474 Clearance No.: FTDI#556 Future Technology Devices Inter...
Datasheet	FT2233HP PDF File

Overview

FT2233HP/FT2232HP Datasheet Version 1.
2 Document No.
: FT_001474 Clearance No.
: FTDI#556 Future Technology Devices International Ltd FT2233HP/FT2232HP (High Speed USB Bridge with Type-C/PD3.
0 Controller) The FT2233HP/FT2232HP is a Hi-Speed USB device • with a Type-C/PD 3.
0 controller that fully supports the latest USB Type-C and Power Delivery (PD) • standards enabling support for power negotiation • with the ability to sink or source current to a USB • host device.
The USB bridge function delivers 2 independent channels compatible with the existing • FT2232H – Dual Hi-speed USB to multipurpose • UART/MPSSE solution.
• The FT2233HP/FT2232HP has the following advanced features: • Supports the USBPD specification Rev 3.
0.
• • Port 1 mode configuration for Sink or Dual-role • Port 2 works as Sink, supporting charge through • to port1 (FT2233HPQ and FT2233HPL only ) • Supports 5V3A, 9V3A, 12V3A, 15V3A and 20V3A • PDOs as sink or source • Type-C/PD Physical Layer Protocol • • PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM • PD mode configuration through external EEPROM • • Options to use external MCU controlling PD policy • through I2C interface • • USB to dual serial ports with a variety of configurations.
• • USB to dual FIFO ports available in Asynchronous FIFO mode, or one USB to Synchronous FIFO • port.
Enabled by external EEPROM settings.
• USB to parallel FIFO transfer data rate up to • 8Mbytes/sec • • Single channel synchronous FIFO mode for transfer up to 40Mbytes/sec.
• • Entire USB protocol handled on the chip.
No USB specific firmware programming required.
• USB 2.
0 High Speed (480Mbits/Second) and Full • Speed (12Mbits/Second) compatible.
• Two Multi-Protocol Synchronous Serial Engine • (MPSSE) on channel A and channel B, to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.
• Independent Baud rate generators.
• RS232/RS422/RS485 UART Transfer ...

Similar Datasheet

FT2233HP High Speed USB Bridge - FTDI

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)