DatasheetsPDF.com

SN75ALS192D

Texas Instruments
Part Number SN75ALS192D
Manufacturer Texas Instruments
Description Quadruple Differential Line Driver
Published Aug 17, 2021
Detailed Description SN75ALS192 SLLS007E – JULY 1985 – REVISED MARCH 2024 SN75ALS192 Quadruple Differential Line Driver 1 Features • Meets o...
Datasheet PDF File SN75ALS192D PDF File

SN75ALS192D
SN75ALS192D

Overview
SN75ALS192 SLLS007E – JULY 1985 – REVISED MARCH 2024 SN75ALS192 Quadruple Differential Line Driver 1 Features • Meets or Exceeds the Requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendation V.
11 • Designed to Operate up to 20 Mbaud • 3-State TTL Compatible • Single 5V Supply Operation • High Output Impedance in Power-Off Condition • Complementary Output-Enable Inputs • Improved Replacement for the AM26LS31 2 Applications • Factory automation • ATM and cash counters • Smart grid • AC and servo motor drives 3 Description The four differential line drivers are designed for data transmission over twisted-pair or parallel-wire transmission lines.
They meet the requirements of ANSI Standard EIA/TIA-422-B and ITU Recommendations V.
11 and are compatible with 3state TTL circuits.
Advanced low-power Schottky technology provides high speed without the usual power penalties.
Standby supply current is typically only 26mA, while typical propagation delay time is less than 10ns.
High-impedance inputs maintain low input currents, less than µA for a high level and less than 100µA for a low level.
Complementary output-enable inputs (G and G) allow these devices to be enabled at either a high input level or low input level.
The SN75ALS192 is capable of data rates in excess of 20 Mbit/s and is designed to operate with the SN75ALS193 quadruple line receiver.
The SN75ALS192 is characterized for operation from 0°C to 70°C.
Package Information PART NUMBER PACKAGE(1) PACKAGE SIZE(2) SN75ALS192 SOIC (D, 16) SO (NS, 16) 9.
9mm × 6mm 10.
2mm × 7.
8mm (1) For more information, see Section 10.
(2) The package size (length × width) is a nominal value and includes pins, where applicable.
Logic Symbol† Logic Diagram (Positive Logic) † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters a...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)