DatasheetsPDF.com

XRA1201

MaxLinear
Part Number XRA1201
Manufacturer MaxLinear
Description 16-BIT I2C / SMBUS GPIO EXPANDER
Published Jan 28, 2022
Detailed Description XRA1201 / XRA1201P 16-bit I2C / SMBUS GPIO EXPANDER February 2, 2022 Rev. 1.0.2 GENERAL DESCRIPTION The XRA1201/1201P...
Datasheet PDF File XRA1201 PDF File

XRA1201
XRA1201

Overview
XRA1201 / XRA1201P 16-bit I2C / SMBUS GPIO EXPANDER February 2, 2022 Rev.
1.
0.
2 GENERAL DESCRIPTION The XRA1201/1201P is a 16-bit GPIO expander with an I2C/SMBus interface.
After power-up, the XRA1201 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.
The XRA1201P has the internal pull-up resistors enabled upon power-up in case it is necessary for the inputs to be in a known state.
In addition, the GPIOs on the XRA1201/1201P can individually be controlled and configured.
As outputs, the GPIOs can be outputs that are high, low or in three-state mode.
The three-state mode feature is useful for applications where the power is removed from the remote devices, but they may still be connected to the GPIO expander.
As inputs, the internal pull-up resistors can be enabled or disabled and the input polarity can be inverted.
The interrupt can be programmed for different behaviors.
The interrupts can be programmed to generate an interrupt on the rising edge, falling edge or on both edges.
The interrupt can be cleared if the input changes back to its original state or by reading the current state of the inputs.
The XRA1201/1201P are enhanced versions of other 16-bit GPIO expanders with an I2C/SMBus interface.
The XRA1201 is pin and software compatible with the PCA9535, TCA9535 and MAX7312.
The XRA1201P is pin and software compatible with the CAT9555, PCA9555, TCA9555, MAX7311 and MAX7318.
The XRA1201/1201P are available in 24-pin QFN and 24-pin TSSOP packages.
FEATURES  1.
65V to 3.
6V operating voltage  16 General Purpose I/Os (GPIOs)  5V tolerant inputs  Maximum stand-by current of 1uA at +1.
8V  I2C/SMBus bus interface  I2C clock frequency up to 400kHz  Noise filter on SDA and SCL inputs  Up to 32 I2C Slave Addresses  Individually programmable inputs  Internal pull-up resistors  Polarity inversion  Individual interrupt enable  Rising edge and/or Falling edge interrupt  Input filter  Individually programmable outputs  Ou...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)