DatasheetsPDF.com

TLV9002-Q1

Part Number	TLV9002-Q1
Manufacturer	Texas Instruments
Description	Low-Power RRIO 1-MHz Automotive Operational Amplifier
Published	Jul 4, 2023
Detailed Description	TLV9001-Q1, TLV9002-Q1, TLV9004-Q1 SBOS980E – MAY 2019 – REVISED APRIL 2023 TLV900x-Q1 Low-Power RRIO 1-MHz Automotive O...
Datasheet	TLV9002-Q1 PDF File

Overview

TLV9001-Q1, TLV9002-Q1, TLV9004-Q1 SBOS980E – MAY 2019 – REVISED APRIL 2023 TLV900x-Q1 Low-Power RRIO 1-MHz Automotive Operational Amplifier 1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C to +125°C, TA – Device HBM ESD classification level 2 – Device CDM ESD classification level C6 • Scalable CMOS amplifier for low-cost applications • Rail-to-rail input and output • Low input offset voltage: ±0.
4 mV • Unity-gain bandwidth: 1 MHz • Low broadband noise: 27 nV/√ Hz • Low input bias current: 5 pA • Low quiescent current: 60 µA\/Ch • Unity-gain stable • Internal RFI and EMI filter • Operational at supply voltages as low as 1.
8 V • Easier to stabilize with higher capacitive load due to resistive open-loop output impedance • Functional Safety-Capable – Functional Safety Information 2 Applications • Optimized for AEC-Q100 grade 1 applications • Infotainment and Cluster • Passive safety • Body electronics and lighting • HEV/EV inverter and motor control • On-board (OBC) and wireless charger • Power-train current sensor • Advanced driver assistance systems (ADAS) • Single-supply, low-side, unidirectional current- sensing circuit RG 3 Description The TLV900x-Q1 family includes single (TLV9001Q1), dual (TLV9002-Q1), and quad-channel (TLV9004-Q1) low-voltage (1.
8 V to 5.
5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities.
These op amps provide a costeffective solution for space-constrained automotive applications such as infotainment and lighting where low-voltage operation and high capacitive-load drive are required.
The capacitive-load drive of the TLV900x-Q1 family is 500 pF, and the resistive openloop output impedance makes stabilization easier with much higher capacitive loads.
These op amps are designed specifically for low-voltage operation (1.
8 V to 5.
5 V) with performance specifications similar to the TLV600x-Q1 devices.
The robust design of the TLV900x-Q1 family simplifies circuit des...

Similar Datasheet

TLV9002-Q1 Low-Power RRIO 1-MHz Automotive Operational Amplifier - Texas Instruments

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)