DatasheetsPDF.com

CY7C65215

Infineon
Part Number CY7C65215
Manufacturer Infineon
Description USB-serial dual-channel bridge
Published Sep 18, 2023
Detailed Description CY7C65215, CY7C65215A USB-serial dual channel (UART/I2C/SPI) bridge with CAPSENSE™ and BCD Features • USB 2.0 certified...
Datasheet PDF File CY7C65215 PDF File

CY7C65215
CY7C65215

Overview
CY7C65215, CY7C65215A USB-serial dual channel (UART/I2C/SPI) bridge with CAPSENSE™ and BCD Features • USB 2.
0 certified, Full-Speed (12 Mbps) - Support for communication driver class (CDC), personal health care device class (PHDC), and vendor device class - Battery charger detection (BCD) compliant with USB Battery Charging Specification Rev 1.
2 (Peripheral Detect only) - Integrated USB termination resistors • Two-channel configurable UART interfaces - CY7C65215 supports 2-pin, 4-pin and 6-pin UART interface whereas CY7C65215A supports 2-pin, 4-pin, 6-pin and 8-pin UART interface - Data rates up to 3 Mbps - 190 bytes each transmit and receive buffer per channel - Data format: • 7 or 8 data bits • 1 or 2 stop bits • No parity, even, odd, mark, or space parity - Supports parity, overrun, and framing errors - Supports flow control using CTS, RTS, DTR, DSR - Supports UART break signal - CY7C65215 supports dual channel RS232/RS422 interfaces whereas CY7C65215A supports RS232/RS422/RS485 interfaces • Two-channel configurable SPI interfaces - Data rate up to 3 MHz for SPI master and 1 MHz for SPI slave - Data width: 4 bits to 16 bits - 256 bytes for each transmit and receive buffer per channel - Supports Motorola, TI, and National SPI modes • Two-channel configurable I2C interfaces - Master/slave up to 400 kHz - Supports multi-master I2C - 256 bytes for each transmit and receive buffer per channel • CAPSENSE™ - SmartSense™ Auto-Tuning is supported through a Cypress-supplied configuration utility - Max CAPSENSE™ buttons: 8 - GPIOs linked to CAPSENSE™ buttons • JTAG interface: JTAG master for code flashing at 400 kHz • General-purpose input/output (GPIO) pins: 17 • Supports unique serial number feature for each device, which fixes the COM port number permanently when USB-Serial Bridge controller as CDC device plugs in • Configuration utility (Windows) to configure the following: - Vendor ID (VID), Product ID (PID), and Product and Manufacturer descriptors - UART/I2C/SPI/JTA...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)