DatasheetsPDF.com

OPA607-Q1

Part Number	OPA607-Q1
Manufacturer	Texas Instruments
Description	Rail to Rail Output CMOS Operational Amplifier
Published	Nov 28, 2023
Detailed Description	OPA607-Q1, OPA2607-Q1 SBOSA38A – FEBRUARY 2021 – REVISED APRIL 2021 OPAx607-Q1, Automotive, 50-MHz , Rail to Rail Output...
Datasheet	OPA607-Q1 PDF File

Overview

OPA607-Q1, OPA2607-Q1 SBOSA38A – FEBRUARY 2021 – REVISED APRIL 2021 OPAx607-Q1, Automotive, 50-MHz , Rail to Rail Output CMOS Operational Amplifier 1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Temperature grade 1: –40°C to +125°C, TA • Gain bandwidth product (GBW): 50 MHz • Quiescent current: 900 µA (typical) • Input offset drift: 1.
5 μV/°C (maximum) • Offset voltage: 120 µV (typical) • Input bias current: 10 pA (maximum) • Rail-to-rail output (RRO) • Supply range : 2.
2 V to 5.
5 V 2 Applications • DC/DC converter • Inverter and motor control • On-Board (OBC) and wireless charger • e-Turbo • HVAC compressor module • Gesturing LOAD Short Circuit VTH ± Detection RF TLV3201 VS+ + VS+ ISH RG ± REXT RSH RG OPAx607-Q1 + CEXT ADS7042 3 Description The OPA607-Q1 and OPA2607-Q1 devices are decompensated, minimum gain of 6 V/V stable, general-purpose CMOS operational amplifiers with low noise of 3.
8 nV/√ Hz and a GBW of 50 MHz.
The low voltage offset drift (dVOS/dT) and wide bandwidth of the OPAx607-Q1 devices make them attractive for low cost general-purpose applications like low side current sensing and TIA (transipedance amplifier).
The high-impedance CMOS inputs make the OPAx607-Q1 devices ideal amplifiers to interface with sensors with high output impedance (for example, piezoelectric transducers).
The rail-to-rail output (RRO) of the OPAx607-Q1 devices can swing up to 8 mV from the supply rails, maximizing dynamic range.
The OPAx607-Q1 is optimized for low supply voltage operation as low as 2.
2 V (±1.
1 V) and up to 5.
5 V (±2.
75 V), and is specified over the temperature range of –40°C to +125°C.
Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) OPA607-Q1 SOT23 (5) 2.
90 mm × 1.
60 mm OPA2607-Q1 VSSOP (8) 3.
00 mm × 3.
00 mm (1) For all available packages, see the orderable addendum at the end of the data sheet.
LED driver VREF Transimpedance stage + OPAx607-Q1 í ADS7042 RF...

Similar Datasheet

OPA607-Q1 Rail to Rail Output CMOS Operational Amplifier - Texas Instruments

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)