DatasheetsPDF.com

AMS682 Datasheet PDF


Part Number AMS682
Manufacturer Advanced Monolithic Systems
Title INVERTING VOLTAGE DOUBLER
Description The AMS682 is a CMOS charge pump converter that provides an inverted doubled output from a single positive supply. Requiring only three external c...
Features
• 99.9% Voltage Conversion Efficiency
• 92% Power Conversion Efficiency
• Wide Input Voltage Range +2.4V to 5.5V
• 185µ A Supply Current
• Available in SO-8 and PDIP Packages
• Only 3 external Capacitors Required AMS682 INVERTING VOLTAGE DOUBLER APPLICATIONS
• Portable Handheld Instrumentation
• C...

File Size 62.40KB
Datasheet AMS682 PDF File








Similar Ai Datasheet

AMS-117 : .

AMS-162 : M/A-COM’s AM-162 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a TO-8-1 package, a surface mount package and a connectorized version. The ground plane on the PC board should be configured to remove heat from under the package. AM-162 are ideally suited for use where a high intercept, high reliability amplifier is required. TO-8-1 Outline Drawing: SMA Connectorized * SF-1 Rev. V5 ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Absolute Maximum Ratings 1 Pin Configuration (For AMS-162) Pin No. 1 2 Funct.

AMS0026 : The AMS0026 is the high cell density trenched N-ch MOSFETs, which provide excellent RDSON and gate charge for most of the synchronous buck converter applications. The AMS0026 meet the RoHS and Green Product requirement, 100% EAS guaranteed with full function reliability approved. FEATURES - Advanced high cell density Trench technology - Super Low Gate Charge - Excellent CdV/dt effect decline - Green Device Available  Product Summery BVDSS 100V RDSON 20mΩ ID 7.5A SOP8 Pin configuration ( 5,6,7,8 ) (4) ( 1,2,3 ) 1/5 Axelite Confidential Materials, do not copy or distribute without written consent. Rev.1.1 Oct.27, 2016 ORDER/MARKING INFORMATION Order Information AMS0026 X X Packag.

AMS04 : The AMS04 and the AMS05 are two-terminal, band-gap voltage reference diodes, with an output voltage of 1.25V for the AMS04 and 2.5V for the AMS05. These devices feature low dynamic impedance and good temperature coefficient, operating over a wide current range. Since the band-gap reference of these devices uses only transistors and resistors, low noise and good long term stability result. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The AMS04 and AMS05 can be used for portable meters, regulators, data acquisition converters and telecommunication. The AMS04 and AMS05 are operational over a temperature range of 0°C to 70°C and are avai.

AMS05 : The AMS04 and the AMS05 are two-terminal, band-gap voltage reference diodes, with an output voltage of 1.25V for the AMS04 and 2.5V for the AMS05. These devices feature low dynamic impedance and good temperature coefficient, operating over a wide current range. Since the band-gap reference of these devices uses only transistors and resistors, low noise and good long term stability result. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The AMS04 and AMS05 can be used for portable meters, regulators, data acquisition converters and telecommunication. The AMS04 and AMS05 are operational over a temperature range of 0°C to 70°C and are avai.

AMS1004-1.2 : The AMS1004-1.2 is a two-terminal micropower band-gap voltage reference diode. It features a very low dynamic impedance and good temperature coefficient, operating over a 10µA to 20mA current range. On-chip trimming is used to provide tight voltage tolerance. Since the AMS1004-1.2 is a band-gap reference, uses only transistors and resistors, low noise and good long term stability result. Careful design of the AMS1004-1.2 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the AMS1004-1.

AMS1004-2.5 : The AMS1004-2.5 is a two-terminal micropower band-gap voltage reference diode. It features a very low dynamic impedance and good temperature coefficient, operating over a 20µA to 20mA current range. On-chip trimming is used to provide tight voltage tolerance. Since the AMS1004-2.5 is a band-gap reference, uses only transistors and resistors, low noise and good long term stability result. Careful design of the AMS1004-2.5 has made the device exceptionally tolerant of capacitive loading, making it easy to use in almost any reference application. The wide dynamic operating range allows its use with widely varying supplies with excellent regulation. The extremely low power drain of the AMS1004-2.

AMS1009 : The AMS1009 is a precision band-gap voltage reference diode. This voltage reference features a very low dynamic impedance and good temperature coefficient, operating over a wide current range of 400µA to 10mA. On-chip trimming is used to provide tight tolerance and minimize temperature drift. A third terminal allows the reference voltage to be adjusted to ±5% to calibrate out system errors. The AMS1009 is used as a precision 2.5V low voltage reference for digital voltmeters, power supplies or op amp circuitry, and the 2.5V make it easy to obtain a stable reference from 5V logic supplies. The AMS1009 is available in TO-92 and SO-8 packages operating over a 0°C to 70°C temperature range. ORDE.

AMS104 : Light Sensor (AMS1, 3) Cadmium-free sensor with spectral response The Through-hole Type for easy implementation as a CdS cell replacement • SMD type LIGHT SENSOR TYPICAL APPLICATIONS 1. Brightness detection for LCD backlight control for LCD devices (mobile phones, LCD TVs, car navigation systems, mobile PCs, and PDAs). 2. Brightness detection for controlling the keypad backlight in mobile phones. 3. Brightness detection for circuits in household lighting, crime prevention lighting, and automatic lighting for bicycle. 4. Brightness detection for wall clocks (radio clocks). FEATURES 1. Built-in optical filter for spectral response similar to that of the human eye. Peak sensitivity wavelength .

AMS104T : Light Sensor (AMS1, 3, 4) Cadmium-free sensor with spectral response Chip type ideal for brightness adjustment of mobile device displays • SMD type L 2.0mm .079inch W 3.2mm .126inch H 1.0mm .039inch LIGHT SENSOR TYPICAL APPLICATIONS SMD and Through-hole types 1. Brightness detection for LCD backlight control for LCD devices (LCD TVs, car navigation systems, and mobile PCs). 2. Brightness detection for circuits in residential lighting, lighting for security, and automatic lighting for bicycle. 3. Household applicances (day/night energy savings for air conditioners and electric hot water pots, etc.) 4. Brightness detection for wall clocks (radio clocks). Chip type 1. Brightness detection for .

AMS104Y : Light Sensor (AMS1, 3) Cadmium-free sensor with spectral response The Through-hole Type for easy implementation as a CdS cell replacement • SMD type LIGHT SENSOR TYPICAL APPLICATIONS 1. Brightness detection for LCD backlight control for LCD devices (mobile phones, LCD TVs, car navigation systems, mobile PCs, and PDAs). 2. Brightness detection for controlling the keypad backlight in mobile phones. 3. Brightness detection for circuits in household lighting, crime prevention lighting, and automatic lighting for bicycle. 4. Brightness detection for wall clocks (radio clocks). FEATURES 1. Built-in optical filter for spectral response similar to that of the human eye. Peak sensitivity wavelength .

AMS1082 : The AMS1082 series of adjustable and fixed voltage regulators are designed to provide 10A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.5V at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry. The AMS1082 devices are pin compatible with older three-terminal regulators and are offered in 3 lead TO-220 package and 3 lead TO-263 (Plastic DD). ORDERING INFORMATION: PACKAGE TYPE 3 LEAD TO-220 3 LEAD TO-263 AMS1082CT AMS108.

AMS1083 : The The AMS1083 series of adjustable and fixed voltage regulators are designed to provide 8A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.5V at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry. The AMS1083 devices are pin compatible with older three-terminal regulators and are offered in 3 lead TO-220 package and 3 lead TO-263 (Plastic DD). ORDERING INFORMATION: PACKAGE TYPE 3 LEAD TO-220 AMS1083CT AMS1083CT-1.5 AMS1083.

AMS1084 : TThhee AMS1084 series of adjustable and fixed voltage regulators are designed to provide 5A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.5V at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry. The AMS1084 devices are pin compatible with older three-terminal regulators and are offered in 3 lead TO-220 package, 3 and 2 lead TO-263 (Plastic DD) and TO-252 (D PAK) package. ORDERING INFORMATION: 3 LEAD TO-220 AMS1084CT AMS1.

AMS1085 : TThhee AMS1085 series of adjustable and fixed voltage regulators are designed to provide 3A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry. The AMS1085 devices are pin compatible with older three-terminal regulators and are offered in 3 lead TO-220 package, 3 and 2 lead TO-263 (Plastic DD) and TO-252 (D PAK) package. ORDERING INFORMATION: 3 LEAD TO-220 AMS1085CT AMS1.

AMS1086 : TThhee AMS1086 series of adjustable and fixed voltage regulators are designed to provide 1.5A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.5V at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry. The AMS1086 devices are pin compatible with older three-terminal regulators and are offered in 3 lead TO-220 package, 3 lead TO-263 (Plastic DD), TO-252 (D PAK) and SOT-223 package. ORDERING INFORMATION: 3 LEAD TO-220 AMS1086CT.

AMS1117 : The AMS1117 is a low dropout three-terminal regulator with a dropout of 1.4V at 1A output current. The AMS1117 series provides current limiting and thermal shutdown. Its circuit includes a trimmed band-gap reference to assure output voltage accuracy to be within 2% for 1.2V, 1.5V,1.8V, 2.5V, 3.3V, 5V and adjustable versions. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal shutdown provides protection against any combination of overload and ambient temperature that would create excessive junction temperature. The AMS 1117 has an adjustable version that can provide the output voltage from 1.25V to 5V with only two external resis.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)