DatasheetsPDF.com

S524C80D80

Samsung semiconductor
Part Number S524C80D80
Manufacturer Samsung semiconductor
Description 1K/2K/4K/8K-bit Serial EEPROM with software write protect
Published Apr 7, 2005
Detailed Description S524C20D10/20D20/80D40/80D80 1K/2K/4K/8K-bit Serial EEPROM with software write protect Data Sheet OVERVIEW The S524C20D...
Datasheet PDF File S524C80D80 PDF File

S524C80D80
S524C80D80


Overview
S524C20D10/20D20/80D40/80D80 1K/2K/4K/8K-bit Serial EEPROM with software write protect Data Sheet OVERVIEW The S524C20D10/20D20/80D40/80D80 serial EEPROM has a 1,024/2,048/4,096/8,192-bit (128/256/512/1,024byte) capacity, supporting the standard I2C™-bus serial interface.
It is fabricated using Samsung’ s most advanced CMOS technology.
Important features are a hardware-based write protection circuit for the entire memory area and software-based write protection logic for the lower 128 bytes.
Hardware-based write protection is controlled by the state of the write-protect (WP) pin.
The software-based method is one-time programmable and permanent.
Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation.
Another significant feature of the S524C20D10/20D20/80D40/80D80 is its support for fast mode and standard mode.
FEATURES I2C-Bus Interface • • Two-wire serial interface Automatic word address increment • Operating Characteristics • Operating voltage — 2.
5 V to 5.
5 V (write) — 2.
2 V to 5.
5 V (read) EEPROM • • • • • • • • 1K/2K/4K/8K-bit (128/256/512/1,024-byte) storage area 16-byte page buffer Typical 3.
5 ms write cycle time with auto-erase function Hardware-based write protection for the entire EEPROM (using the WP pin) Software-based write protection for the lower 128-byte EEPROM EEPROM programming voltage generated on chip 1,000,000 erase/write cycles 100 years data retention • • • Operating current — Maximum write current: < 3 mA at 5.
5 V — Maximum read current: < 200 µA at 5.
5 V — Maximum stand-by current: < 5 µA at 3.
3 V Operating temperature range — – 25°C to + 70°C (commercial) — – 40°C to + 85°C (industrial) Operating clock frequencies — 100 kHz at standard mode — 400 kHz at fast mode Electrostatic discharge (ESD) — 3,000 V (HBM) — 300 V (MM) Packages • 8-pin DIP, SOP, and TSSOP 4-1 S524C20D10/20D20/80D40/80D80 SERIAL EEPROM DATA SHEET SDA Start/Stop Logic HV Generation Timing Control WP Control Logic ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)