DatasheetsPDF.com

ZLNB2001

Zetex Semiconductors
Part Number ZLNB2001
Manufacturer Zetex Semiconductors
Description DUAL TONE and POLARITY SWITCH LNB MULTIPLEX CONTROLLER
Published Apr 16, 2005
Detailed Description DUAL TONE and POLARITY SWITCH LNB MULTIPLEX CONTROLLER ISSUE 1- NOVEMBER 1998 DEVICE DESCRIPTION The ZLNB200X dual polar...
Datasheet PDF File ZLNB2001 PDF File

ZLNB2001
ZLNB2001

Overview
DUAL TONE and POLARITY SWITCH LNB MULTIPLEX CONTROLLER ISSUE 1- NOVEMBER 1998 DEVICE DESCRIPTION The ZLNB200X dual polarisation and tone switch controller is one of a wide range of satellite receiver LNB support circuits available from Zetex.
It features two completely independent channels, each providing logic outputs to control LNB polarisation selection, local oscillator selection and downfeed disable.
It is intended for use in Twin Universal LNBs, replacing many discrete components to save both manufacturing cost and PCB size whilst improving reliability.
The two polarisation control inputs of the ZLNB200X have a nominal threshold of 14.
75V.
The threshold is temperature compensated to minimise drift.
Each features a low and stable input current that enables transient protection to be achieved with the addition of only a single resistor per channel.
Twin Universal LNBs can be called to operate with one of their controlling receivers powered down/disconnected, with attendant cable mismatch problems.
To e ase de sign for this situation, each polarisation input of the ZLNB200X has a second threshold set at 9.
5V.
An input voltage below this threshold indicates ZLNB2001 ZLNB2002 ZLNB2003 ZLNB2004 "receiver not present", switching the channels Enable pin low.
This logic output can be used to disable the associated downfeed driver, eliminating any problems due to cable mismatch.
Universal LNB local oscillator selection is achieved by detection of a low level AC voltage superimposed on the polarisation control voltage.
To facilitate this function, the ZLNB200X includes a separate tone detector for each channel.
Full control of detector bandwidth and sensitivity is provided using two external resistors and capacitors.
In the ZLNB2003/4, additional control of tone switch delays is provided to assist with the rejection of low frequency control signals intended for other systems.
Polarisation switch and tone detector outputs can source and sink 10mA making them suitable to...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)