DatasheetsPDF.com

X24320

Xicor
Part Number X24320
Manufacturer Xicor
Description 400KHz 2-Wire Serial E2PROM with Block Lock
Published Apr 16, 2005
Detailed Description 32K X24320 400KHz 2-Wire Serial E2PROM with Block LockTM DESCRIPTION 4K x 8 Bit FEATURES • • • • • • • • • • • • ...
Datasheet PDF File X24320 PDF File

X24320
X24320

Overview
32K X24320 400KHz 2-Wire Serial E2PROM with Block LockTM DESCRIPTION 4K x 8 Bit FEATURES • • • • • • • • • • • • • Save Critical Data with Programmable Block Lock Protection —Block Lock (0, 1/4, 1/2, or all of E2PROM Array) —Software Write Protection —Programmable Hardware Write Protect In Circuit Programmable ROM Mode 400KHz 2-Wire Serial Interface —Schmitt Trigger Input Noise Suppression —Output Slope Control for Ground Bounce Noise Elimination Longer Battery Life With Lower Power —Active Read Current Less Than 1mA —Active Write Current Less Than 3mA —Standby Current Less Than 1µA 1.
8V to 3.
6V, 2.
5V to 5.
5V and 4.
5V to 5.
5V Power Supply Versions 32 Word Page Write Mode —Minimizes Total Write Time Per Word Internally Organized 4K x 8 Bidirectional Data Transfer Protocol Self-Timed Write Cycle —Typical Write Cycle Time of 5ms High Reliability —Endurance: 100,000 Cycles —Data Retention: 100 Years 8-Lead SOIC 14-Lead TSSOP 8-Lead PDIP The X24320 is a CMOS Serial E2PROM, internally organized 4K x 8.
The device features a serial interface and software protocol allowing operation on a simple two wire bus.
The bus operates at 400 KHz all the way down to 1.
8V.
Three device select inputs (S0–S2) allow up to eight devices to share a common two wire bus.
A Write Protect Register at the highest address location, FFFFh, provides three write protection features: Software Write Protect, Block Lock Protect, and Programmable Hardware Write Protect.
The Software Write Protect feature prevents any nonvolatile writes to the device until the WEL bit in the Write Protect Register is set.
The Block Lock Protection feature gives the user four array block protect options, set by programming two bits in the Write Protect Register.
The Programmable Hardware Write Protect feature allows the user to install the device with WP tied to VCC, write to and Block Lock the desired portions of the memory array in circuit, and then enable the In Circuit Programmable ROM Mode by programming the...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)