DatasheetsPDF.com

X24640

Part Number	X24640
Manufacturer	Xicor
Description	400KHz 2-Wire Serial E 2 PROM with Block Lock
Published	Apr 16, 2005
Detailed Description	64K X24640 400KHz 2-Wire Serial E2PROM with Block LockTM DESCRIPTION 8K x 8 Bit FEATURES • • • • • • • • • • • • ...
Datasheet	X24640 PDF File

Overview

64K X24640 400KHz 2-Wire Serial E2PROM with Block LockTM DESCRIPTION 8K x 8 Bit FEATURES • • • • • • • • • • • • • Save Critical Data with Programmable Block Lock Protection —Block Lock (0, 1/4, 1/2, or all of E2PROM Array) —Software Program Protection —Programmable Hardware Write Protect In Circuit Programmable ROM Mode 400KHz 2-Wire Serial Interfac —Schmitt Trigger Input Noise Suppression —Output Slope Control for Ground Bounce Noise Elimination Longer Battery Life With Lower Power —Active Read Current Less Than 1mA —Active Program Current Less Than 3mA —Standby Current Less Than 1µA 1.
8V to 3.
6V, 2.
5V to 5.
5V and 4.
5V to 5.
5V Power Supply Versions 32 Word Page Write Mode —Minimizes Total Write Time Per Word Internally Organized 8K x 8 Bidirectional Data Transfer Protocol Self-Timed Write Cycle —Typical Write Cycle Time of 5ms High Reliability —Endurance: 100,000 Cycles —Data Retention: 100 Years 8-Lead SOIC 20-Lead TSSOP 8-Lead PDIP The X24640 is a CMOS Serial E2PROM, internally organized 8K x 8.
The device features a serial interface and software protocol allowing operation on a simple two wire bus.
The bus operates at 400 KHz all the way down to 1.
8V.
Three device select inputs (S0–S2) allow up to eight devices to share a common two wire bus.
A Write Protect Register at the highest address location, FFFFh, provides three write protection features: Software Write Protect, Block Lock Protect, and Programmable Hardware Write Protect.
The Software Write Protect feature prevents any nonvolatile writes to the device until the WEL bit in the Write Protect Register is set.
The Block Lock Protection feature gives the user four array block protect options, set by programming two bits in the Write Protect Register.
The Programmable Hardware Write Protect feature allows the user to install the device with WP tied to VCC, program and Block Lock the desired portions of the memory array in circuit, and then enable the In Circuit Programmable ROM Mode by programming t...

Similar Datasheet

X24640 400KHz 2-Wire Serial E 2 PROM with Block Lock - Xicor
X24641 400 KHz 2-Wire Serial E 2 PROM - Xicor
X24645 Advanced 2-Wire Serial E 2 PROM with Block Lock TM Protection - Xicor

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)