DatasheetsPDF.com

SL74HC221

Part Number	SL74HC221
Manufacturer	System Logic Semiconductor
Description	Dual Monostable Multivibrator
Published	Apr 16, 2005
Detailed Description	SL74HC221 Dual Monostable Multivibrator The SL74HC221 is identical in pinout to the LS/ALS221. The device inputs are co...
Datasheet	SL74HC221 PDF File

Overview

SL74HC221 Dual Monostable Multivibrator The SL74HC221 is identical in pinout to the LS/ALS221.
The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs.
There are two trigger inputs, A INPUT (negative edge) and B INPUT (positive edge).
These inputs are valid for rising/falling signals The device may also be triggered by using the CLR input (positiveedge) because of the Schmitt-trigger input; after triggering the output maintains the MONOSTABLE state for the time period determined by the external resistor RX and capacitor CX.
Taking CLR low breaks this MONOSTABLE STATE.
If the next trigger pulse occurs during the MONOSTABLE period it makes the MONOSTABLE period longer.
• Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 3.
0 to 6.
0 V • Low Input Current: 1.
0 µA • High Noise Immunity Characteristic of CMOS Devices ORDERING INFORMATION SL74HC221N Plastic SL74HC221D SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM PIN 16 =VCC PIN 8 = GND FUNCTION TABLE Inputs Outputs CLR H H H H H X L L H L* L * Note Note (1) CX, RX, DX are external components.
(2) DX is a clamping diode.
The external capacitor is charged to VCC in the stand-by state, i.
e.
no trigger.
When the supply voltage is turned off CX is discharged mainly through an internal parasitic diode.
If CX is sufficiently large and VCC decreases rapidy, there will be some possibility of damaging the I.
C.
with a surge current or latch-up.
If the voltage supply filter capacitor is large enough and VCC decrease slowly, the surge current is automatically limited and damage the I.
C.
is avoided.
The maximum forward current of the parasitic diode is approximately 20 mA.
A B H Q Q Output Enable H* H * X H L L X L X Inhibit Inhibit Output Enable Output Enable Inhibit X = don’t care * - except for monostable period SLS System Logic Semiconductor SL74HC221 MAXIMUM RATINGS * Symbol VCC VIN VOUT IIN...

Similar Datasheet

SL74HC20 Dual 4-Input NAND Gate - System Logic Semiconductor
SL74HC221 Dual Monostable Multivibrator - System Logic Semiconductor
SL74HC240 Octal 3-State Inverting Buffer/Line Driver/Line Receiver - System Logic Semiconductor
SL74HC241 Octal 3-State Noninverting Buffer/Line Driver/Line Receiver - System Logic Semiconductor
SL74HC244 Octal 3-State Noninverting Buffer/Line Driver/Line Receiver - System Logic Semiconductor
SL74HC245 Octal 3-State Noninverting Bus Transceiver - System Logic Semiconductor
SL74HC251 8-Input Data Selector/Multiplexer with 3-State Outputs - System Logic Semiconductor
SL74HC253 Dual 4-Input Data Selector/Multiplexer with 3-State Otputs - System Logic Semiconductor
SL74HC257 Quad 2-Input Data Selector/Multiplexer with 3-State Outputs - System Logic Semiconductor
SL74HC258 Quad 2-Input Data Selectors/Multiplexer with 3-State Outputs - System Logic Semiconductor

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)