DatasheetsPDF.com

SLX24C04P

Siemens Semiconductor Group
Part Number SLX24C04P
Manufacturer Siemens Semiconductor Group
Description 4 Kbit 512 x 8 bit Serial CMOS EEPROMs/ I2C Synchronous 2-Wire Bus/ Page Protection Mode
Published Apr 16, 2005
Detailed Description Standard EEPROM ICs SLx 24C04/P 4 Kbit (512 × 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus and Page Protect...
Datasheet PDF File SLX24C04P PDF File

SLX24C04P
SLX24C04P

Overview
Standard EEPROM ICs SLx 24C04/P 4 Kbit (512 × 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus and Page Protection Mode™ Data Sheet 1998-07-27 SLx 24C04/P Revision History: Previous Version: Page Page (in previous (in current Version) Version) 3 4, 5 5 5 11, 12 15 21 19 25 25 25 I2C Bus Current Version: 1998-07-27 06.
97 Subjects (major changes since last revision) 3 4, 4 – 5 11, 12 15 21 24 25 25 25 Text was changed to “Typical programming time 5 ms for up to 16 bytes”.
CS0, CS1 and CS2 were replaced by n.
c.
The paragraph “Chip Select (CS0, CS1, CS2)” was removed completely.
WP = VCC protects the upper half entire memory.
The erase/write cycle is finished latest after 10 8 ms.
Figure 11: second command byte is a CSR and not CSW.
The write or erase cycle is finished latest after 10 4 ms.
“Capacitive load …” were added.
Some timings were changed.
The line “erase/write cycle” was removed.
Chapter 8.
4 “Erase and Write Characteristics” has been added.
Purchase of Siemens I2C components conveys the license under the Philips I2C patent to use the components in the I2C system provided the system conforms to the I2C specifications defined by Philips.
Edition 1998-07-27 Published by Siemens AG, Bereich Halbleiter, MarketingKommunikation, Balanstraße 73, 81541 München © Siemens AG 1998.
All Rights Reserved.
Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances.
For information on the types in qu...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)