DatasheetsPDF.com

G5-iMac

Part Number	G5-iMac
Manufacturer	Apple
Description	Power Supply / 20-Inch Replacement Instructions
Published	Apr 20, 2005
Detailed Description	 iMac G5 Power Supply, 20-inch Replacement Instructions Follow the instructions in this document carefully. Failure to...
Datasheet	G5-iMac PDF File

Overview

 iMac G5 Power Supply, 20-inch Replacement Instructions Follow the instructions in this document carefully.
Failure to follow these instructions could damage your equipment and void its warranty.
Note: Online instructions are available at http://www.
apple.
com/support/doityourself/.
Tools Required • Use the screwdriver provided, or a Phillips #1 screwdriver, preferably with a magnetized tip • Flat blade screwdriver • Screw tray or equivalent to hold the screws Part Location 033-2497 Rev.
A Important Things to Know 1.
A spares kit is included with the replacement part.
The kit includes: • a Phillips #1 screwdriver • extra screws 2.
All customer removable screws are brass colored.
Do not remove screws unless they are brass colored, or you will void your warranty.
3.
Ground yourself when working on the computer.
The procedure will show you how to ground yourself.
4.
Do not pull on individual wires when disconnecting a part; pull on the connector.
2 - iMac G5 Power Supply, 20-inch Opening the Computer 1.
Turn off your computer by choosing Shut Down from the Apple (K) menu.
2.
Disconnect all cables, and unplug the power cord from your computer.
3.
Place a soft, clean towel or cloth on the desk or surface.
Hold the sides of the computer and slowly lay the computer face down as shown.
iMac G5 Power Supply, 20-inch - 3 4.
Locate the three case screws circled below.
You may have to lift the metal foot to locate the middle case screw.
Note: These screws are captive; they are part of the display/bezel assembly and cannot be removed.
5.
Using the tool provided, or a Phillips #1 screwdriver, loosen the three captive screws.
Note: Turn the screws counterclockwise until they stop turning.
6.
Holding the back cover by the metal foot, tilt the cover up and lift it off the computer.
Set the back cover aside.
4 - iMac G5 Power Supply, 20-inch Removing the Power Supply 1.
Ground yourself.
Touch the metal surface (as shown below) on the inside of the computer to discharge a...

Similar Datasheet

G5-iMac Power Supply / 20-Inch Replacement Instructions - Apple

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)