DatasheetsPDF.com

LS5540-7R

Power-One
Part Number LS5540-7R
Manufacturer Power-One
Description 100 Watt AC-DC Converters with PFC
Published Apr 25, 2005
Detailed Description Cassette Style 100 Watt AC-DC Converters S Series PFC 100 Watt AC-DC Converters with PFC Input voltage range from 85....
Datasheet PDF File LS5540-7R PDF File

LS5540-7R
LS5540-7R

Overview
Cassette Style 100 Watt AC-DC Converters S Series PFC 100 Watt AC-DC Converters with PFC Input voltage range from 85.
.
.
264 V AC 1 or 2 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltage • Universal input voltage range • Power factor >0.
95, harmonics < IEC/EN 61000-3-2 • Input over- and undervoltage lock-out • Efficient input filter and built-in surge and transient suppression circuitry • Fully isolated outputs • Outputs overload, open- and short-circuit proof • No derating over entire operating temperature range Safety according to IEC/EN 60950 LGA S Series 111 4.
4" 3U 60 2.
4" 12 TE 168 6.
6" Summary The S 4000/S 5000 series of AC-DC converters represents a flexible range of power supplies for use in advanced electronic systems.
Features include full power factor correction, high efficiency, high reliability, low output voltage noise and excellent dynamic response to load/line changes.
The converter inputs are protected against surges and transients occurring at the source lines.
An input over- and undervoltage lock-out circuitry disables the outputs if the input voltage is outside the specified range.
Inrush current limitation is included preventing circuit breakers and fuses from being damaged at switch-on.
All outputs are overload, open- and short-circuit proof and are protected against overvoltages by means of a built-in suppressor diode.
The outputs can be inhibited by a logic signal applied to the connector pin 18 (i).
If the inhibit function is not used pin 18 must be connected to pin 14 to enable the outputs.
LED indicators display the status of the converter and allow visual monitoring of the system at any time.
Full input to output, input to case, output to case and output to output isolation is provided.
The modules are designed and built according to the international safety standards IEC/EN 60950 and have been approved by the safety agencies LGA (Germany) and UL (USA).
The UL Mark for Canada has been officially recognized by regul...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)