DatasheetsPDF.com

M54HCT374

ST Microelectronics
Part Number M54HCT374
Manufacturer ST Microelectronics
Description OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT HCT374 NON INVERTING - HCT534 INVERTING
Published Apr 26, 2005
Detailed Description M54/74HCT374 M54/74HCT534 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT HCT374 NON INVERTING - HCT534 INVERTING . . . . . ...
Datasheet PDF File M54HCT374 PDF File

M54HCT374
M54HCT374

Overview
M54/74HCT374 M54/74HCT534 OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT HCT374 NON INVERTING - HCT534 INVERTING .
.
.
.
.
.
.
HIGH SPEED fMAX = 62 MHz (TYP.
) AT VCC = 5 V LOW POWER DISSIPATION ICC = 4 µA (MAX.
) AT TA = 25 °C COMPATIBLE WITH TTL OUTPUTS VIH = 2V (MIN.
) VIL = 0.
8V (MAX) OUTPUT DRIVE CAPABILITY 15 LSTTL LOADS SYMMETRICAL OUTPUT IMPEDANCE IOL = IOH= 6 mA (MIN.
) BALANCED PROPAGATION DELAYS tPLH = tPHL PIN AND FUNCTION COMPATIBLE WITH 54/74LS374/534 B1R (Plastic Package) F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) DESCRIPTION The M54/74HCT374, M54/74HCT534, are high speed CMOS OCTAL D-TYPE FLIP FLOP WITH 3STATE OUTPUTS fabricated with in silicon gate 2 C MOS technology.
They have the same high speed performance of LSTTL combined with true CMOS low power comsuption.
These8-bit D-type flip-flops are controlled by a clock input (CK) and an ouput enable input (OE).
On the positive transition of the clock, the Q outputs will be set to the logic state that were setup at the D inputs (HCT374) or their complements (HCT534).
While the OE input is low, the eight outputs will be in a normal logic state (high or low logic level), and while high level, the outputs will be in a high impedance state.
The output control does not affect the internal operation of flip-flops.
That is, the old data can PIN CONNECTION (top view) ORDER CODES : M54HCTXXXF1R M74HCTXXXM1R M74HCTXXXB1R M74HCTXXXC1R be retained or the new data can be entered even while the outputs are off.
The application engineer has a choice of combination of inverting and non-inverting outputs.
The 3-state output configuration and the wide choice of outline make bus-organized systems simple.
All inputs are equipped with protection circuits against static discharge and transient excess voltage.
This integrated circuit has input and output characteristics that are fully compatible with 54/74 LSTTL logic families.
M54/74HCT devices are designed to directly interface HSC2MOS systems with TTL...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)