DatasheetsPDF.com

MD57-0001SMB

Tyco
Part Number MD57-0001SMB
Manufacturer Tyco
Description Low Cost MMIC Mixer with Local Oscillator Amplifier / 0.8 GHz - 1.0 GHz
Published Apr 29, 2005
Detailed Description Low Cost MMIC Mixer with Local Oscillator Amplifier, 0.8-1.0 GHz MD57-0001 MD57-0001 Low Cost MMIC Mixer with Local O...
Datasheet PDF File MD57-0001SMB PDF File

MD57-0001SMB
MD57-0001SMB

Overview
Low Cost MMIC Mixer with Local Oscillator Amplifier, 0.
8-1.
0 GHz MD57-0001 MD57-0001 Low Cost MMIC Mixer with Local Oscillator Amplifier, 0.
8 GHz - 1.
0 GHz Features • • • -5 to +5 dBm LO Drive Level High Isolation, 28 dB LO to RF Inexpensive SOT-26 Package SOT-26 .
114 ±.
008 2,9 ±0,2 .
075 ±.
008 1,90 ±0,2 Description The MD57-0001 is a floating FET mixer with an on-chip LO amplifier.
The LO drive for the MD57-0001 can range from -5 to +5 dBm without severly impacting the mixer’s performance.
The MD57-0001 is ideally suited for cellular band communications handsets’ that can provide only minimal amounts of LO drive.
Typical applications include frequency up/down conversion and IQ modulation and demodulation in digital receivers and transmitters.
The MD57-0001 utilizes a patented “floating-FET” architecture.
The on-chip LO amplifier allows the MD57-0001 to operate with as little as -5 dBm of LO drive making it an ideal choice for low power portable designs.
The MD57-0001 is fabricated using M/A-COM’s 0.
5 micron low noise GaAs MESFET process.
This process features full passivation for increased performance and reliability.
The MD57-0001 is 100% RF tested to ensure superior performance specification compliance.
+.
008 .
063 -.
004 1,60 +0.
20 -0.
10 16XY .
110 ±.
008 2,80 ±0,2 PIN # 1 .
031+.
004 -.
007 0,79 +0.
10 -0.
18 .
016 +.
004 -.
002 +0.
10 0,40 -0.
05 .
002 ±.
002 0,05 ±0,05 +.
008 .
043 -.
004 +0.
20 1,10 -0.
10 +.
004 .
006 -.
002 +0.
10 0,15 -0.
05 .
008 MIN 0,20 MIN Ordering Information Part Number MD57-0001 MD57-0001TR MD57-0001SMB Package SOT-26, 6-Lead Plastic Package Forward Tape and Reel* Designer’s Kit *If a specific reel size is required, consult factory for part number.
Electrical Specifications Parameters Conversion Loss Isolation 1 TA = +25°C, RF = 900MHz (-15 dBm), LO = 730MHz (-5 dBm), IF = 170MHz, VDD = 2.
7V, Typical IDD = 5mA Abbv.
Lc ISO Test Conditions — LO to RF LO to IF RF to IF RF Port LO Port IF Port RF Freq.
= 900 MHz, LO = -5 dBm Two tones at -10 dBm ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)