DatasheetsPDF.com

74F670

Philips
Part Number 74F670
Manufacturer Philips
Description 4 x 4 register file
Published May 28, 2005
Detailed Description INTEGRATED CIRCUITS 74F670 4 x 4 register file (3-State) Product specification IC15 Data Handbook 1990 Jul 12 Philips ...
Datasheet PDF File 74F670 PDF File

74F670
74F670

Overview
INTEGRATED CIRCUITS 74F670 4 x 4 register file (3-State) Product specification IC15 Data Handbook 1990 Jul 12 Philips Semiconductors Philips Semiconductors Product specification 4 x 4 register file (3-State) 74F670 FEATURES • Simultaneous and Independent Read and Write operations • Expandable to almost any word size and bit length • 3-State outputs DESCRIPTION The 74F670 is a 16-bit 3-State Register File organized as 4 words of 4 bits each.
Separate Read and Write Address and Enable inputs are available, permitting simultaneous writing into one word location and reading from another location.
The 4-bit word to be stored is presented to four data inputs.
The Write address inputs (WA and WB) determine the location of the stored word.
The Write Address inputs should only be changed when the Write Enable input (WE) is High for conventional operation.
When the WE is Low, the data is entered into the addressed location.
The addressed location remains transparent to the data while the WE is Low.
Data supplied at the inputs will be read out in true (non-inverting) form from the 3-State outputs.
Data and address inputs are inhibited when the WE is High.
Direct acquisition of data stored in any of the four registers is made possible by individual Read Address inputs (RA, RB).
The addressed word appears at the four outputs when the Read Enable (RE) is Low.
Data outputs are in the high impedance “off” state when the RE is High.
This permits outputs to be tied together to increase the word capacity to very large numbers.
Up to 128 devices can be stacked to increase the word size to 512 locations by tying the 3-State outputs together.
Since the limiting factor for expansion is the output High current, further stacking is possible by tying pullup reisistors to the outputs to increase the IOH current available.
Design of the Read Enable signals for the stacked devices must ensure that there is no overlap in the Low levels which cause more than one output to be active at the...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)