DatasheetsPDF.com

SP3223EH Datasheet PDF


Part Number SP3223EH
Manufacturer Sipex
Title High Speed Intelligent +3.0V to +5.5V RS-232 Transceivers
Description The SP3223EH and 3243EH products are RS-232 transceiver solutions intended for portable or hand-held applications such as notebook and palmtop com...
Features allows the device to automatically "wake-up" during a shutdown state when an RS-232 cable is connected and a connected peripheral is turned on. Otherwise, the device automatically shuts itself down drawing less than 1µA. SELECTION TABLE Device SP3223EH SP3243EH Power Supplies +3.0V to +5.5V +3.0V t...

File Size 230.96KB
Datasheet SP3223EH PDF File








Similar Ai Datasheet

SP322 : The SP322 is a programmable V.11 or V.35 transceiver IC. The SP322 contains three drivers and three receivers when selected in each mode. The selection is done by the V.11/V.35 select pin. The V.11 transceivers can typically operate at 10Mbps while adhering to the ITU V.11 specifications. The V.35 transceivers can operate up to 10Mbps while adhering to the ITU V.35 specifications. The SP322 contains internal resistor termination for compliant V.35 operation as well as the V.11 termination on the receiver inputs for optional cable termination. Each SP322 driver contains a control pin which disables the output and places the output pins in a high impedance state. Each receiver also has a contr.

SP3220 : The SP3220 device is an RS-232 driver/receiver solution intended for portable or hand-held applications such as notebook or palmtop computers. The SP3220 device has a highefficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3220 device to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The SP3220 device has a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1µA. VCC + 15 VCC 2 C1+ 0.1µF 4 C15 C2+ C2 + 0.1µF 6 C211 T1IN 9 R1OUT 5kΩ 1 EN GND 14 *can be returned to either VCC or GND SHDN 16 T1OUT R1IN 1.

SP3220B : The SP3220B/U device is an RS-232 driver/receiver solution intended for portable or hand-held applications such as notebook or palmtop computers. The SP3220B/U device has a highefficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3220B/U device to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The SP3220B/U device has a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1µA. VCC + 15 VCC 2 C1+ 0.1µF 4 C15 C2+ C2 + 0.1µF 6 C211 T1IN 9 R1OUT 5kΩ 1 EN GND 14 *can be returned to either VCC or GND SHDN 16 .

SP3220E : The SP3220E devices are RS-232 driver/receiver solutions intended for portable or hand-held applications such as palmtop computers, instrumentation and consumer products. These devices incorporate a high-efficiency, charge-pump power supply that allows the SP3220E device.

SP3220E : The SP3220E device is an RS-232 driver/receiver solution intended for portable or hand-held applications such as notebook or palmtop computers. The SP3220E device has a highefficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3220E device to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The ESD tolerance of the SP3220E device is over +15kV for both Human Body Model and IEC1000-4-2 Air discharge test methods. The SP3220E device has a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1µA. VCC + 15 VCC.

SP3220EB : The SP3220E devices are RS-232 driver/receiver solutions intended for portable or hand-held applications such as palmtop computers, instrumentation and consumer products. These devices incorporate a high-efficiency, charge-pump power supply that allows the SP3220E device.

SP3220EU : The SP3220E devices are RS-232 driver/receiver solutions intended for portable or hand-held applications such as palmtop computers, instrumentation and consumer products. These devices incorporate a high-efficiency, charge-pump power supply that allows the SP3220E device.

SP3220U : The SP3220B/U device is an RS-232 driver/receiver solution intended for portable or hand-held applications such as notebook or palmtop computers. The SP3220B/U device has a highefficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3220B/U device to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The SP3220B/U device has a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1µA. VCC + 15 VCC 2 C1+ 0.1µF 4 C15 C2+ C2 + 0.1µF 6 C211 T1IN 9 R1OUT 5kΩ 1 EN GND 14 *can be returned to either VCC or GND SHDN 16 .

SP3221E : The SP3221E is an RS-232 transceiver solution intended for portable applications such as notebook and hand held computers. This device uses an internal high-efficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump and Exar's driver architecture allow the SP3.

SP3221E : The SP3221E is a RS-232 transceiver solution intended for portable or hand-held applications such as notebook and palmtop computers. The SP3221E has a high-efficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump and low dropout transmitters allow the SP3221E device to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The Auto-Online feature allows the device to automatically "wake-up" during a shutdown state when an RS-232 cable is connected . Otherwise, the device automatically shuts itself down drawing less than 1µA. SELECTION TABLE Device SP3221E SP3220E Power Supplies +3.0V to +5.5V +3.0V to +5.5.

SP3221E : The SP3221E is an RS-232 transceiver solution intended for portable applications such as notebook and hand held computers. This device uses an internal high-efficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump and MaxLinear's driver architecture allow the SP3221E to deliver compliant RS-232 performance from a single power supply ranging from +3.0V to +5.5V. The SP3221E is a 1-driver/1-receiver device ideal for laptop/notebook computer and PDA applications. The SP3221E is offered in 16 pin TSSOP and SSOP packages. The AUTO ON-LINE® feature allows the device to automatically "wake-up" during a shutdown state when an RS-232 cable is connec.

SP3222 : The SP3222/3232E series is an RS-232 transceiver solution intended for portable or handheld applications such as notebook or palmtop computers. The SP3222/3232E series has a high-efficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3222/3232E series to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The SP3222/3232E are 2-driver/2-receiver devices. This series is ideal for portable or hand-held applications such as notebook or palmtop computers. The ESD tolerance of the SP3222/3232E devices are over ±15kV for both Human Body Model and IEC1000-4-2 Air discharge test methods. The SP3222.

SP3222 : The SP3222 integrates 2 channels of low capacitance diodes to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust diodes can safely absorb repetitive ESD strikes above the maximum level specified in the IEC61000-4-2 international standard (±30kV contact discharge) without performance degradation. The low loading capacitance makes it ideal for protecting high speed data lines such as DVI, USB2.0, USB3.0 and eSATA. Pinout SOD883 12 3 Bottom View Features • ESD protection of ±30kV contact discharge, ±30kV air discharge, (IEC61000-4-2) • EFT, IEC61000-4-4, 40A (5/50ns) • Lightning protection, IEC61000-4-5 2nd edition, 3A .

SP3222B : The SP3222B/3232B series is an RS-232 transceiver solution intended for portable or handheld applications such as notebook or palmtop computers. The SP3222B/3232B series has a high-efficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3222B/3232B series to deliver true RS-232 performance from a single power supply ranging from +3.0V to +5.5V. The ESD tolerance of the SP3222B/3232B devices are over ±15kV for both Human Body Model and IEC10004-2 Air discharge test methods. The SP3222B device has a low-power shutdown mode where the devices' driver outputs and charge pumps are disabled. During shutdown, the supply current falls .

SP3222E : The SP3222E and SP3232E series are RS-232 transceiver solutions intended for portable or hand-held applications such as notebook or palmtop computers. The SP3222E / SP3232E series has a highefficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3222E / SP3232E series to deliver true RS-232 performance from a single power supply ranging from 3.0V to 5.5V. The SP3222E / SP3232E are 2-driver / 2-receiver devices. This series is ideal for portable or hand-held applications such as notebook or palmtop computers. The ESD tolerance of the SP3222E / SP3232E devices are over ±15kV for both Human Body Model and IEC61000-4-2 Air dischar.

SP3222E : The SP3222E/3232E series is an RS-232 transceiver solution intended for portable or handheld applications such as notebook or palmtop computers. The SP3222E/3232E series has a high-efficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3222E/3232E series to deliver true RS-232 performance from a single power supply ranging from +3.3V to +5.0V. The SP3222E/3232E are 2-driver/2-receiver devices. This series is ideal for portable or hand-held applications such as notebook or palmtop computers. The ESD tolerance of the SP3222E/3232E devices are over ±15kV for both Human Body Model and IEC1000-4-2 Air discharge test methods. The S.

SP3222E : The SP3222E and SP3232E series are RS-232 transceiver solutions intended for portable or hand-held applications such as notebook or palmtop computers. The SP3222E / SP3232E series has a highefficiency, charge-pump power supply that requires only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3222E / SP3232E series to deliver true RS-232 performance from a single power supply ranging from 3.0V to 5.5V. The SP3222E / SP3232E are 2-driver / 2-receiver devices. This series is ideal for portable or hand-held applications such as notebook or palmtop computers. The ESD tolerance of the SP3222E / SP3232E devices are over ±15kV for both Human Body Model and IEC61000-4-2 Air dischar.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)