DatasheetsPDF.com

MX29F040

Macronix International
Part Number MX29F040
Manufacturer Macronix International
Description 4M-BIT [512KX8] CMOS EQUAL SECTOR FLASH MEMORY
Published Sep 2, 2005
Detailed Description MX29F040 4M-BIT [512KX8] CMOS EQUAL SECTOR FLASH MEMORY FEATURES • 524,288 x 8 only • Single power supply operation - 5....
Datasheet PDF File MX29F040 PDF File

MX29F040
MX29F040

Overview
MX29F040 4M-BIT [512KX8] CMOS EQUAL SECTOR FLASH MEMORY FEATURES • 524,288 x 8 only • Single power supply operation - 5.
0V only operation for read, erase and program operation • Fast access time: 55/70/90/120ns • Low power consumption - 30mA maximum active current(5MHz) - 1uA typical standby current • Command register architecture - Byte Programming (7us typical) - Sector Erase 8 equal sectors of 64K-Byte each • Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability.
- Automatically program and verify data at specified address • Erase suspend/Erase Resume - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.
Status Reply - Data polling & Toggle bit for detection of program and erase cycle completion.
Sector protect/unprotect for 5V only system or 5V/ 12V system.
Sector protection - Hardware method to disable any combination of sectors from program or erase operations 100,000 minimum erase/program cycles Latch-up protected to 100mA from -1V to VCC+1V Low VCC write inhibit is equal to or less than 3.
2V Package type: - 32-pin PLCC, TSOP or PDIP Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash 20 years data retention • • • • • • • • • GENERAL DESCRIPTION The MX29F040 is a 4-mega bit Flash memory organized as 512K bytes of 8 bits.
MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.
The MX29F040 is packaged in 32-pin PLCC, TSOP, PDIP.
It is designed to be reprogrammed and erased in system or in standard EPROM programmers.
The standard MX29F040 offers access time as fast as 55ns, allowing operation of high-speed microprocessors without wait states.
To eliminate bus contention, the MX29F040 has separate chip enable (CE) and output enable (OE ) controls.
MXIC's Flash memories augment EPROM functionality with in-circuit...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)