DatasheetsPDF.com

LM7001J Datasheet PDF

Sanyo Semicon Device
Part Number LM7001J
Manufacturer Sanyo Semicon Device
Title Direct PLL Frequency Synthesizers
Description No. 5262-4/8 LM7001J, 7001JM Data Input Timing VIH = 2.2 to 6.5 V, VIL = 0 to 0.7 V, Xtal = 5.00 to 7.20 (typ) to 8.00 MHz Data acquisition: On ...
Features
• The LM7001J and LM7001JM are PLL frequency synthesizer LSIs for tuners, making it possible to make up high-performance AM/FM tuners easily.
• These LSIs are software compatible with the LM7000, but do not include an IF calculation circuit.
• The FM VCO circuit includes a high-speed programmable di...

File Size 91.91KB
Datasheet PDF File LM7001J PDF File


LM7001J LM7001J LM7001J




Similar Ai Datasheet

LM70 : The LM70 is a temperature sensor, Delta-Sigma analog-to-digital converter with an SPI and MICROWIRE compatible interface available in LLP and MSOP 8-pin packages. The host can query the LM70 at any time to read temperature. A shutdown mode decreases power consumption to less than 10 µA. This mode is useful in systems where low average power consumption is critical. The LM70 has 10-bit plus sign temperature resolution (0.25˚C per LSB) while operating over a temperature range of −55˚C to +150˚C. The LM70’s 2.65V to 5.5V supply voltage range, low supply current and simple SPI interface make it ideal for a wide range of applications. These include thermal management and protection applications i.

LM70 : The LM70 is a temperature sensor, Delta-Sigma analog-to-digital converter with an SPI and MICROWIRE compatible interface available in WSON and VSSOP 8-pin packages. The host can query the LM70 at any time to read temperature. A shutdown mode decreases power consumption to less than 10 µA. This mode is useful in systems where low average power consumption is critical. The LM70 has 10-bit plus sign temperature resolution (0.25°C per LSB) while operating over a temperature range of −55°C to +150°C. The LM70's 2.65V to 5.5V supply voltage range, low supply current and simple SPI interface make it ideal for a wide range of applications. These include thermal management and protection applications.

LM7000 : .

LM7000N : .

LM7001 : Ordering number : EN 3591A NMOS LSI LM7001/7001M Direct PLL Frequency Synthesizers .

LM7001JM : No. 5262-4/8 LM7001J, 7001JM Data Input Timing VIH = 2.2 to 6.5 V, VIL = 0 to 0.7 V, Xtal = 5.00 to 7.20 (typ) to 8.00 MHz Data acquisition: On the CL rising edge Note: Data transfers must be started only after the crystal oscillator is operating normally, i.e., after a proper input signal has been supplied to XIN. Parameter Enable setup time Enable hold time Data setup time Data hold time Clock low-level time Clock high-level time Rise time Fall time Symbol tES tEH tSU tHD tLO tHI tR tF Xtal: 7.20 MHz At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs At least 1.5 µs Up to 1 µs Up to 1 µs Xtal: for frequencies other than 7.2 MHz At least [ At least [ At le.

LM7001M : Ordering number : EN 3591A NMOS LSI LM7001/7001M Direct PLL Frequency Synthesizers .

LM7005 : .

LM7006 : .

LM7006H : .

LM7007HM : .

LM7007M : .

LM7008HM : .

LM7008M : .

LM709 : The LM709 series is a monolithic operational amplifier intended for general-purpose applications Operation is completely specified over the range of voltages commonly used for these devices The design in addition to providing high gain minimizes both offset voltage and bias currents Further the class-B output stage gives a large output capability with minimum power drain External components are used to frequency compensate the amplifier Although the unity-gain compensation network specified will make the amplifier unconditionally stable in all feedback configurations compensation can be tailored to optimize high-frequency performance for any gain setting The LM709C is the commercial-industri.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)