DatasheetsPDF.com

SAA7804 Datasheet PDF

NXP
Part Number SAA7804
Manufacturer NXP
Title One Chip CD Audio Device
Description The SAA7804, is a single chip solution CD audio decoder, digital servo, audio DAC, pre-amp, laser driver and integrated ARM7TDMI-S microprocessor,...
Features 2.1 Hardware features s Channel decoder based on SAA7817 IC design s Digital servo based on SAA7824 IC design s 32-bit embedded ARM7 RISC microprocessor supporting both 32-bit and 16-bit Thumb instruction sets s Mask programmed internal program ROM for microprocessor s Register structure redesigned ...

File Size 688.43KB
Datasheet PDF File SAA7804 PDF File


SAA7804 SAA7804 SAA7804




Similar Ai Datasheet

SAA7803 : The SAA7803 has the same features and pinning as the SAA7804 and SAA7806 devices. The SAA7803 is a multi chip module containing two additional memories, flash and SRAM, to support code development. This IC is intended for development use only and may therefore not comply with all aspects of the Philips Semiconductors general quality specification for integrated circuits (SNW-FQ-611). This IC can therefore also not be the subject of any existing or future quality agreement. All warranties are hereby disclaimed and Philips accepts no liability or indemnity whatsoever as to the use of this IC. This IC contains multiple memories along side the audio device resulting in higher levels of emitted noi.

SAA7806 : The SAA7806, is a single chip solution CD audio decoder, digital servo, audio DAC, pre-amp, laser driver and integrated ARM7TDMI-S microcontroller, targeted at automotive CD applications. The channel decoder design is derived from the SAA7817 DVD decoder IC, with optimization and design improvements specifically for CD audio (e.g. improved CD playability). The digital servo, analog pre-amp, laser driver and audio DAC blocks are improved designs based on the SAA7824 CD decoder IC. Further architectural enhancements to the design have been made to integrate system functionality and reduce the system cost of ownership. The SAA7806 IC supports a generic architecture that will form the basis of fu.

SAA7811HL : The SAA7811 is a single-chip device for high speed DVD-ROM applications. The device contains the following blocks previously contained in separate ICs: • channel decoder • block decoder • servo processor • microcontroller. MAX. 3.6 3.6 5.5 3.6 − 35 60 +125 V V V V UNIT mA MHz °C °C 1. The analog and digital core supply pins (VDDA and VDDD(CO)) must be connected to the same external supply. ORDERING INFORMATION PACKAGE TYPE NUMBER NAME SAA7811HL 1999 Oct 05 LQFP208 DESCRIPTION plastic low profile quad flat package; 208 leads; body 28 × 28 × 1.4 mm 3 VERSION SOT459-1 This text is here in white to force landscape pages to be rotated correctly when browsing through the pdf in the Acrobat read.

SAA7817HL : QUICK REFERENCE DATA ORDERING INFORMATION BLOCK DIAGRAM PINNING REGISTER/MEMORY MAP LIMITING VALUES CHARACTERISTICS PACKAGE OUTLINE SOLDERING Introduction to soldering surface mount packages Reflow soldering Wave soldering Manual soldering Suitability of surface mount IC packages for wave and reflow soldering methods DATA SHEET STATUS DEFINITIONS DISCLAIMERS PURCHASE OF PHILIPS I2C COMPONENTS SAA7817HL 2003 Sep 23 2 Free Datasheet http://www.Datasheet4U.com Philips Semiconductors Product specification DVD and CD playback IC 1 FEATURES SAA7817HL • Host interface: – Supports ATAPI interface – Configurable as generic DMA interface; for use with external host interface devices – Automati.

SAA7818HL : The SAA7818HL is a device for 6 × DVD and 18 × CD playback applications. This device contains an embedded microcontroller which can operate as a 33 MHz or 67 MHz equivalent 80C51 and interfaces to the channel decoder, block decoder and servo processor. New features enable superior playability in both CD and DVD modes. The block decoder has an embedded DVD video authentication module and supports up to 64 Mbit of external SDRAM memory. The data can be fed out in a number of different configurations including I2S-bus, ATAPI and UDE. This device also includes the option to bypass the external memory altogether, creating a bufferless ATAPI or UDE data path solution. The channel decoder has select.

SAA7824 : ORDERING INFORMATION QUICK REFERENCE DATA BLOCK DIAGRAM PINNING FUNCTIONAL DESCRIPTION Data acquisition and HF data path Decoder part Principle operating modes of the decoder Decoder speed and crystal frequency Lock-to-disc mode Standby modes Crystal oscillator Data slicer and bit clock regenerator DC offset cancellation Offset cancellation Reading back the DC offset value Demodulator Frame sync protection EFM demodulation Subcode data processing Q-channel processing EIAJ 3 and 4-wire subcode (CD graphics) interface V4 subcode interface CD text interface FIFO and error correction Flags output (CFLG) Audio functions De-emphasis and phase linearity Digital oversampling filter Concealment Mute,.

SAA7826 : ORDERING INFORMATION QUICK REFERENCE DATA BLOCK DIAGRAM PINNING FUNCTIONAL DESCRIPTION Data acquisition and HF data path Decoder part Principle operating modes of the decoder Decoder speed and crystal frequency Lock-to-disc mode Standby modes Crystal oscillator Data slicer and bit clock regenerator DC offset cancellation Offset cancellation Reading back the DC offset value Demodulator Frame sync protection EFM demodulation Subcode data processing Q-channel processing EIAJ 3 and 4-wire subcode (CD graphics) interface V4 subcode interface CD text interface FIFO and error correction Flags output (CFLG) Audio functions De-emphasis and phase linearity Digital oversampling filter Concealment Mute,.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)