DatasheetsPDF.com

AT1393A Datasheet PDF


Part Number AT1393A
Manufacturer Aimtron Technology
Title 6-Channel DC-DC Converter IC
Description The AT1393 provides a complete power solution for digital still and video cameras through the integration of synchronous rectification topology , ...
Features
• Low start-up power supply voltage :1.7V(CH6)
• Wide supply voltage range from 2.4V to 6.5V (CH6); 3.6V to 6.5V(CH1~5)
• Up to 1MHz operating frequency
• Supports for down and up/down Zeta synchronous rectification conversion(CH1)
• Supports for up and up/down SEPIC synchronous rectification conver...

File Size 750.25KB
Datasheet AT1393A PDF File








Similar Ai Datasheet

AT1303 : .

AT1305 : The AT1305 is a PFM step-up DC/DC converter with LDO for applications using 1 Cell or 2 Cell Alkaline battery and USB applications. Besides, the 32µA low quiescent current together with high efficiency maintains long battery life time. It provides a constant output voltage for inputs that vary above and below the output voltage. Applications • MP3 • Power source for battery-powered equipment • Power source for cameras, camcorders, VCRs, PDAs, electronic data banks, and hand-held Communication equipment Block Diagram Aimtron reserves the right without notice to change this circuitry and specifications. 7F, No.9,PARK AVENUE. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel.

AT1308 : The AT1308 step-up converter is designed for small or medium size LCD panel of high bias voltage with a constant current to provide PDAs, and other hand-held devices. It features a fast 1.0 MHz current-mode PWM control with a built-in 0.3Ω N-MOS that allows for smaller capacitor and inductor. Fault condition protection uses cycle-bycycle current limiting to sense maximum inductor current and thermal protection. Also included soft-start circuitry eliminates inrush current during start-up. The AT1308 is availab.

AT1308A : The AT1308A step-up converter is designed for small or medium size LCD panel of high bias voltage with a constant current to provide PDAs, and other hand-held devices. It features a fast 1.0 MHz current-mode PWM control with a built-in 0.3ΩN-MOS that allows for smaller capacitor and inductor. Fault condition protection uses cycle-by-cycle current limiting to sense maximum inductor current and thermal protection. Also included soft-start eliminates inrush current during start-up. The AT1308A is available in 5-pin SOT-23-5 packages. Ordering Information Part n.

AT1309 : The AT1309 step-up converter is designed for small or medium size LCD panel of high bias voltage with a constant current to provide PDAs, and other hand-held devices. It features a fast 1.4 MHz current-mode PWM control with a built-in 0.3 Ω N-MOS that allows for smaller capacitor and inductor. Fault condition protection uses cycle-by -cycle current limiting to sense maximum inductor current and thermal protection. Also included soft-start eliminates inrush current during start-up. The AT1309 is available in 5-pin SOT-25 packages. Application • STN/OLED Bias • Personal Digital Assistants(PDAs) • DSC Block Diagram Aimtron reserves the right without notice to change this circuitry and specif.

AT1310 : The AT1310 is a MicroPower switched-capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. Using three small capacitors, the AT1310 can deliver up to 100mA to the regulated output. The AT1310 features very low quiescent current and high frequency over a large portion of its load range making this device ideal for battery-powered applications. Applications • Cellular Phones • LED Backlight Driver • DSC Flash Unit for IGBT trigger Level Block Diagram Aimtron reserves the right without notice to change this circuitry and specifications. 7F, No.9, Park Avenue. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0.

AT1312A : The AT1312A/B/C step-up converter drives white •Operating Voltage:2.5V to 6.0V. LEDs with a constant current to provide backlight in •High Operating Frequency: 1MHz cell phones, PDAs, and other hand-held devices. It •High Output Voltage: Up to 16V/23V/28V features allowing series connection of the white LEDs so that the LED currents are identical for •Shutdown Current 1µA uniform brightness. An enable input can be pulsed •16V/23V/28V Output Over-Voltage Protection repeatedly to adjust LED’s brightness. The fast 1.0 •Digital Dimming Control. MHz current-mode PWM control allows for smaller capacitor and inductor. Fault condition protection •Built-in Cycle-by Cycle Current-Limiting. uses cycle.

AT1312B : The AT1312A/B/C step-up converter drives white •Operating Voltage:2.5V to 6.0V. LEDs with a constant current to provide backlight in •High Operating Frequency: 1MHz cell phones, PDAs, and other hand-held devices. It •High Output Voltage: Up to 16V/23V/28V features allowing series connection of the white LEDs so that the LED currents are identical for •Shutdown Current 1µA uniform brightness. An enable input can be pulsed •16V/23V/28V Output Over-Voltage Protection repeatedly to adjust LED’s brightness. The fast 1.0 •Digital Dimming Control. MHz current-mode PWM control allows for smaller capacitor and inductor. Fault condition protection •Built-in Cycle-by Cycle Current-Limiting. uses cycle.

AT1312C : The AT1312A/B/C step-up converter drives white •Operating Voltage:2.5V to 6.0V. LEDs with a constant current to provide backlight in •High Operating Frequency: 1MHz cell phones, PDAs, and other hand-held devices. It •High Output Voltage: Up to 16V/23V/28V features allowing series connection of the white LEDs so that the LED currents are identical for •Shutdown Current 1µA uniform brightness. An enable input can be pulsed •16V/23V/28V Output Over-Voltage Protection repeatedly to adjust LED’s brightness. The fast 1.0 •Digital Dimming Control. MHz current-mode PWM control allows for smaller capacitor and inductor. Fault condition protection •Built-in Cycle-by Cycle Current-Limiting. uses cycle.

AT1313 : The AT1313 step-up converter drives white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices. It features allowing series connection of the white LEDs so that the LED currents are identical for uniform brightness. An enable input can be pulsed repeatedly to adjust LED’s brightness. The fast 1.4 MHz current-mode PWM control allows for smaller capacitor and inductor. Fault condition protection uses cycle-by-cycle current limiting to sense maximum inductor current, thermal protection and over-voltage protection. Also included soft-start eliminates inrush current during start-up. The 0.2V low reference voltage minimized the power loss across the c.

AT1314 : Block Diagram EN Regulator Current Sense Amplifier Current Sense + Contol Logic IN P-MOS OSC 600KHz PWM Comparator Error Amplifier + 0.4V SoftStart SW GND FB COMP Aimtron reserves the right without notice to change this circuitry and specifications. 7F, No.9, PARK AVENUE II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 3/24/2006 REV:2.0 Email: service@aimtron.com.tw AT1314 Preliminary Product Information High-Efficiency Step-Down Current Regulator For LEDs Pin Configuration Ordering Information Part number AT1314S_GRE Package SOP-8,Green Marking AT1314S,Date Code with one bottom line *For more m.

AT1316A : The AT1316A step-up converter drives white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices. It features allowing series connection of the white LEDs so that the LED currents are identical for uniform brightness. An enable input can be pulsed repeatedly to adjust LED’s brightness. The fast 1.0 MHz current-mode PWM control allows for smaller capacitor and inductor. Fault condition protection uses cycle-by-cycle current limi.

AT1358 : Operation Voltage 2.7V~5.5V The AT1358N/AT1358AN provides complete control for a Oscillation Frequency 1MHz DC/DC converter optimized for high-performance Output Current Maximum 1A(DC-DC Converter) microprocessor applications. AT1358N consists of a Built-In 500mA/LDO synchronous step-down DC/DC converter and a AT1358 Built-in Timing Control high-speed LDO regulator. AT1358AN consists of a AT1358A with extra 100mA/LDO synchronous step-down DC/DC converter and two Built-In Current Limit high-speed LDO regulators. DC/DC converter and LDO Built-In UVLO regulators have the different power input. DC/DC Built-In Thermal Shut-Down converter is operated on current mode architecture f.

AT1362A : The AT1362A/B/C provides complete control for a DC/DC converter optimized for hight-performance microprocessor applications. It consists of a synchronous step-down DC/DC converter and a high-speed LDO regulator connected in series with the DC/DC converter output. A power good detector and LDO ON/OFF control is also built-in(metal option). DC/DC converter is operated on current mode architecture for excellent line and load transient response. 1MHz operation frequency is allowing the use of small surface mount inductor and capacitor. The internal.

AT1362A : The AT1362A/B provides complete control for a DC/DC converter optimized for high-performance microprocessor applications. It consists of a synchronous step-down DC/DC converter and a high-speed LDO regulator connected in series with the DC/DC converter output. A power good detector and LDO ON/OFF control is also built-in(metal option). DC/DC converter is operated on current mode architecture for excellent line and load transient response. 1MHz operation frequency is allowing the use of small surface mount inductor and capacitor. The internal synchronous switch increases efficiency and eliminates the need for an external schottky diode. The AT1362A/B is a family of low-noise synchronous step-.

AT1362B : The AT1362A/B/C provides complete control for a DC/DC converter optimized for hight-performance microprocessor applications. It consists of a synchronous step-down DC/DC converter and a high-speed LDO regulator connected in series with the DC/DC converter output. A power good detector and LDO ON/OFF control is also built-in(metal option). DC/DC converter is operated on current mode architecture for excellent line and load transient response. 1MHz operation frequency is allowing the use of small surface mount inductor and capacitor. The internal.

AT1362B : The AT1362A/B provides complete control for a DC/DC converter optimized for high-performance microprocessor applications. It consists of a synchronous step-down DC/DC converter and a high-speed LDO regulator connected in series with the DC/DC converter output. A power good detector and LDO ON/OFF control is also built-in(metal option). DC/DC converter is operated on current mode architecture for excellent line and load transient response. 1MHz operation frequency is allowing the use of small surface mount inductor and capacitor. The internal synchronous switch increases efficiency and eliminates the need for an external schottky diode. The AT1362A/B is a family of low-noise synchronous step-.




Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)