DatasheetsPDF.com

NCP1337

ON Semiconductor
Part Number NCP1337
Manufacturer ON Semiconductor
Description PWM Current Mode Controller
Published Jan 16, 2007
Detailed Description DATA SHEET www.onsemi.com PWM Current-Mode Controller for Free Running Quasi-Resonant Operation NCP1337 The NCP1337 com...
Datasheet PDF File NCP1337 PDF File

NCP1337
NCP1337

Overview
DATA SHEET www.
onsemi.
com PWM Current-Mode Controller for Free Running Quasi-Resonant Operation NCP1337 The NCP1337 combines a true current mode modulator and a demagnetization detector which ensures full Borderline/Critical Conduction Mode in any load/line conditions together with minimum drain voltage switching (Quasi−Resonant operation).
The transformer core reset detection is done internally, without using any external signal, due to the Soxyless concept.
The frequency is internally limited to 130 kHz, preventing the controller to operate above the 150 kHz CISPR−22 EMI starting limit.
By monitoring the feedback pin activity, the controller enters skip mode as soon as the power demand falls below a predetermined level.
As each restart is softened by an internal Soft−Skipt, and as the frequency cannot go below 25 kHz, no audible noise can be heard.
The NCP1337 also features an efficient protective circuitry which, in presence of an overcurrent condition, disables the output pulses and enters a safe burst mode, trying to restart.
Once the default has gone, the device auto−recovers.
Also included is a bulk voltage monitoring function (known as brown−out protection), an adjustable overpower compensation, and a VCC OVP.
The controller immediately restarts after any of these conditions, unless the fault timer has timed out.
Finally, an internal 4.
0 ms soft−start eliminates the traditional startup stress.
Features • Free−Running Borderline/Critical Mode Quasi−Resonant Operation • Current−Mode • Soft−Skip Mode with Minimum Switching Frequency for Standby • Auto−Recovery Short−Circuit Protection Independent of Auxiliary Voltage • Overvoltage Protection • Brown−Out Protection • Two Externally Triggerable Fault Comparators (one for a disable function, and the other for a permanent latch) • Internal 4.
0 ms Soft−Start • 500 mA Peak Current Drive Sink Capability • 130 kHz Max Frequency • Internal Leading Edge Blanking • Internal Temperature Shutdown • Direct Optocoupler Conne...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)