DatasheetsPDF.com

LU6000F1

Sharp Electrionic
Part Number LU6000F1
Manufacturer Sharp Electrionic
Description (LU6000F0 / LU6000F1) 16-Bit Single-Chip Microcomputers
Published Jan 21, 2007
Detailed Description www.DataSheet4U.com LU6000F0/LU6000F1 LU6000F0/LU6000F1 DESCRIPTION The LU6000F0/F1 are single-chip 16-bit microcomput...
Datasheet PDF File LU6000F1 PDF File

LU6000F1
LU6000F1

Overview
www.
DataSheet4U.
com LU6000F0/LU6000F1 LU6000F0/LU6000F1 DESCRIPTION The LU6000F0/F1 are single-chip 16-bit microcomputers, flash memory versions of SM6000 series.
LU6000F0 is packaged in 100-pin QFP and LU6000F1 in 100-pin LQFP (0.
5 mm pin-pitch).
, The LU6000F0/F1 s internal flash memory is user programmable : it can be programmed using a PROM writer, through the serial interface (UART) (on-board writing), or by copying data stored in a PROM by using the copy board designed for this purpose.
LU6000F0/F1 are compatible with SM6000 series which contains ROM instead of flash memory.
LU6000F0/F1 can be programmed to operate as ROM version.
Once the program has been imported into the ROM, the user can run the program without having to verify it.
16-Bit Single-Chip Microcomputers (With Built-In Flash Memory) the resultant data can also successively be stored.
• System clock cycle : 0.
133 µs (MIN.
) (VDD = 4.
5 to 5.
5 V, at 30 MHz main clock cycle) 0.
2 µs (MIN.
)(VDD = 2.
7 to 3.
6 V, at 20 MHz main clock, single chip mode) Selectable system clocks divided by 2 up to 16 main clocks for low power operation.
• Built-in main clock oscillator for system clock • Interrupts : Total 27, software interrupts • 24 maskable interrupts (external 4, internal 20) • 3 nonmaskable interrupts A nonmaskable interrupt, when used in conjunction with BST instruction, can trigger the software reset.
• Standby function : Halt mode/Stop mode • I/O ports x 88/specific purpose function pin x 3 : • Input ports x 8 (also serve as A/D input) • I/O ports x 80 (also serve as function pins) • Specific purpose function pin x 3 (D/A output pin x 2, bus mode selection pin x 1) • Timer : 16-bit multifunction timers x 6 • 5-stage capture + 2-stage compare type x 1 • 1-stage compare type x 2 • 2-stage capture type (or capture + compare) x 2 • 2-stage compare, PWM output type x 1 • Watchdog timer (overrun detect timer) : 8 bits x 1 • Serial interfaces : • Selectable universal asynchronous receiver transmitter (U...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)