DatasheetsPDF.com

A8436

Allegro MicroSystems
Part Number A8436
Manufacturer Allegro MicroSystems
Description Photoflash Capacitor Charger
Published Mar 14, 2007
Detailed Description www.DataSheet4U.com A8436 Photoflash Capacitor Charger with IGBT Driver Features and Benefits ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Power w...
Datasheet PDF File A8436 PDF File

A8436
A8436

Overview
www.
DataSheet4U.
com A8436 Photoflash Capacitor Charger with IGBT Driver Features and Benefits ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ Power with 1 Li+ or 2 Alkaline/NiMH/NiCAD batteries Adjustable output voltage >75% efficiency Three levels of switch current limit: 1.
0, 1.
2, 1.
4 A Fast charge time Charge complete indication Integrated IGBT driver with trigger No primary-side Schottky diode needed Low-profile package (0.
75 mm nominal height) Description The A8436 is a highly integrated IC that charges photoflash capacitors for digital and film cameras.
It also features an integrated IGBT driver that facilitates the flash discharge function and saves board space.
To charge the photoflash capacitor, the A8436 integrates a 40 V, DMOS switch that drives the transformer in a flyback topology, allowing optimized design with tight coupling and high efficiency.
A proprietary control scheme optimizes the capacitor charging time.
Low quiescent current and low shutdown current further improve system efficiency and extend battery life.
Three levels of switch current limit are provided: 1.
0, 1.
2, and 1.
4 A.
The level is determined by configuring the ILIM pin as grounded, floating, or pulled up to IC supply voltage, respectively.
The CHARGE pin enables the A8436 and starts the charging of the output capacitor.
When the designated output voltage is reached, the A8436 stops the charging until the CHARGE pin is toggled again.
Pulling the CHARGE pin low stops charging.
The D ¯ ¯O ¯ ¯N ¯ ¯E ¯ ¯ pin is an open-drain indicator of when the designated output voltage is reached.
The A8436 can be used with two Alkaline/NiMH/NiCAD or one single-cell Li+ battery connected to the transformer primary.
Connect the VIN pin to a 3.
0 to 5.
5 V supply, which can be either the system rail or the Li+ battery, if used.
The A8436 is available in a very low profile (0.
75 mm) 10terminal 3×3 mm MLP/TDFN package, making it ideal for space-constrained applications.
It is lead (Pb) free, with 100% matte-tin leadframe plating.
Pac...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)